# Bentley Question - Temp Sensors

**URL:** <https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078>\
**Category:** Uncategorized\
**Created:** [5 March 2015 11:49 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078 "2015-03-05T11:49:05Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![jonbartlett](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/jonbartlett/32/12_2.png) [@jonbartlett](https://forum.syncro.com.au/u/jonbartlett)\
**Post date:** [5 March 2015 11:49 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078/1 "2015-03-05T11:49:05Z")

</div>

Evening All,
  

I am working on a Syncro project and struggling to interpret the attached Bentley info. Looking at 24.45, does this read that the air flow temp sensor and the coolant temp sensor are essentially the same and have identical temp to resistance profile?

  

Jon.

  

  

 ![](http://xa.yimg.com/kq/groups/cx0CrADtedNoVX1_VA--/or/_.oKxGHrftUu2D686gE-/name/Screen+Shot+2015-03-05+at+10.42.01+PM.png)

---

<div class="post-metadata">

**Author:** ![gregespo73](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/g/8491ac/32.png) [@gregespo73](https://forum.syncro.com.au/u/gregespo73)\
**Post date:** [5 March 2015 20:19 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078/2 "2015-03-05T20:19:51Z")

</div>

Jon, Its been a while since I have looked at this but in my morning haze I would say the diagram on the right&nbsp;half is for the coolant temp sensor and the left half is the ambient intake air temp. Greg E  
&nbsp; 
 
 
 
* * *
 **From:**"Jon Bartlett mail@jaybe.net [Syncro\_T3\_Australia]" \<Syncro\_T3\_Australia@yahoogroups.com\>  
 **To:**"Syncro\_T3\_Australia@yahoogroups.com" \<Syncro\_T3\_Australia@yahoogroups.com\>   
 **Sent:** Thursday, 5 March 2015, 22:49  
 **Subject:** [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]  
  
 
  

&nbsp;

Evening All,

  

I am working on a Syncro project and struggling to interpret the attached Bentley info. Looking at 24.45, does this read that the air flow temp sensor and the coolant temp sensor are essentially the same and have identical temp to resistance profile?

  

Jon.

  

  

 ![](http://xa.yimg.com/kq/groups/cx0CrADtedNoVX1_VA--/or/QVujqiftfNQJ.Rkv5qS6/name/Screen+Shot+2015-03-05+at+10.42.01+PM.png)

---

<div class="post-metadata">

**Author:** ![theoweiss](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@theoweiss](https://forum.syncro.com.au/u/theoweiss)\
**Post date:** [6 March 2015 02:39 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078/3 "2015-03-06T02:39:27Z")

</div>

Jon, Greg,

Yes, that’s how I read it.

Theo

&nbsp;

**From:** Syncro\_T3\_Australia@yahoogroups.com [mailto:Syncro\_T3\_Australia@yahoogroups.com]  
 **Sent:** 06 March 2015 07:20  
 **To:** Syncro\_T3\_Australia@yahoogroups.com  
 **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]

&nbsp;

&nbsp;

Jon, Its been a while since I have looked at this but in my morning haze I would say the diagram on the right&nbsp;half is for the coolant temp sensor and the left half is the ambient intake air temp. Greg E  
&nbsp;

 
* * *
 

**From:**"Jon Bartlett [mail@jaybe.net](mailto:mail@jaybe.net) [Syncro\_T3\_Australia]" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
 **To:**"[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
 **Sent:** Thursday, 5 March 2015, 22:49  
 **Subject:** [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]

&nbsp;

&nbsp;

Evening All,

&nbsp;

I am working on a Syncro project and struggling to interpret the attached Bentley info. Looking at 24.45, does this read that the air flow temp sensor and the coolant temp sensor are essentially the same and have identical temp to resistance profile?

&nbsp;

Jon.

&nbsp;

&nbsp;

![](cid:image001.png@01D05812.F4F818E0)

&nbsp;

---

<div class="post-metadata">

**Author:** ![jonbartlett](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/jonbartlett/32/12_2.png) [@jonbartlett](https://forum.syncro.com.au/u/jonbartlett)\
**Post date:** [6 March 2015 05:03 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078/4 "2015-03-06T05:03:08Z")

</div>

Thanks chaps. I think this is one graph though as the temp "x' axis is continuous. Just wondering if it applies to both air temp and water temp sensors? From what I have read it appears to be the case but the Bentley layout is confusing.

  

> On 6 March 2015 at 13:39, Theo Weiss [teows@melbpc.org.au](mailto:teows@melbpc.org.au) [Syncro\_T3\_Australia] \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\> wrote:  
> 
> > Jon, Greg,
> > 
> > Yes, that’s how I read it.
> > 
> > Theo
> > 
> > **From:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com) [mailto:[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)]  
> > **Sent:** 06 March 2015 07:20  
> > **To:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
> > **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> > 
> > Jon, Its been a while since I have looked at this but in my morning haze I would say the diagram on the right half is for the coolant temp sensor and the left half is the ambient intake air temp. Greg E
> > 
> >  
> > * * *
> >  
> > 
> > **From:**"Jon Bartlett [mail@jaybe.net](mailto:mail@jaybe.net) [Syncro\_T3\_Australia]" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> > **To:**"[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> > **Sent:** Thursday, 5 March 2015, 22:49  
> > **Subject:** [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> > 
> > Evening All,
> > 
> > I am working on a Syncro project and struggling to interpret the attached Bentley info. Looking at 24.45, does this read that the air flow temp sensor and the coolant temp sensor are essentially the same and have identical temp to resistance profile?
> > 
> > Jon.
> > 
> > ![](cid:image001.png@01D05812.F4F818E0)

---

<div class="post-metadata">

**Author:** ![gregespo73](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/g/8491ac/32.png) [@gregespo73](https://forum.syncro.com.au/u/gregespo73)\
**Post date:** [6 March 2015 06:11 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078/5 "2015-03-06T06:11:05Z")

</div>

Right you are&nbsp;Jon. The graph has been split so you can see the detail as the resistance changes very little between 50c and 100c. I checked a known good ect sensor and it is on 2150 ohms at&nbsp;20ish c. I can check my air temp sensor in the morning if you like.

Greg&nbsp;  
&nbsp; 

 
 
 
* * *
 **From:**"Jon Bartlett mail@jaybe.net [Syncro\_T3\_Australia]" \<Syncro\_T3\_Australia@yahoogroups.com\>  
 **To:**"Syncro\_T3\_Australia@yahoogroups.com" \<Syncro\_T3\_Australia@yahoogroups.com\>   
 **Sent:** Friday, 6 March 2015, 16:03  
 **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors  
  
 
  

&nbsp;

Thanks chaps. I think this is one graph though as the temp "x' axis is continuous. Just wondering if it applies to both air temp and water temp sensors? From what I have read it appears to be the case but the Bentley layout is confusing.

  
  

> 

  

On 6 March 2015 at 13:39, Theo Weiss [teows@melbpc.org.au](mailto:teows@melbpc.org.au) [Syncro\_T3\_Australia] \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\> wrote:  

> &nbsp;
> 
> Jon, Greg,
> 
> Yes, that’s how I read it.
> 
> Theo
> 
> &nbsp;
> 
> **From:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com) [mailto:[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)]  
> **Sent:** 06 March 2015 07:20  
> **To:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
> **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> 
> &nbsp;
> 
> &nbsp; 
> 
> Jon, Its been a while since I have looked at this but in my morning haze I would say the diagram on the right&nbsp;half is for the coolant temp sensor and the left half is the ambient intake air temp. Greg E  
> &nbsp; 
> 
>  
> * * *
> 
> **From:**"Jon Bartlett [mail@jaybe.net](mailto:mail@jaybe.net) [Syncro\_T3\_Australia]" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> **To:**"[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> **Sent:** Thursday, 5 March 2015, 22:49  
> **Subject:** [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> 
> &nbsp;
> 
> &nbsp; 
> 
> Evening All,
> 
> &nbsp;
> 
> I am working on a Syncro project and struggling to interpret the attached Bentley info. Looking at 24.45, does this read that the air flow temp sensor and the coolant temp sensor are essentially the same and have identical temp to resistance profile?
> 
> &nbsp;
> 
> Jon.
> 
> &nbsp;
> 
> &nbsp;
> 
> ![](cid:image001.png@01D05812.F4F818E0)
> 
> &nbsp;

---

<div class="post-metadata">

**Author:** ![gregespo73](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/g/8491ac/32.png) [@gregespo73](https://forum.syncro.com.au/u/gregespo73)\
**Post date:** [6 March 2015 06:18 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078/6 "2015-03-06T06:18:26Z")

</div>

Jon check out page 24.19&nbsp;(dijet but same) and 24.57. Greg  
&nbsp; 
 
 
 
* * *
 **From:**"Greg Esposito gregespo73@yahoo.com [Syncro\_T3\_Australia]" \<Syncro\_T3\_Australia@yahoogroups.com\>  
 **To:**"Syncro\_T3\_Australia@yahoogroups.com" \<Syncro\_T3\_Australia@yahoogroups.com\>   
 **Sent:** Friday, 6 March 2015, 17:11  
 **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]  
  
 
  

&nbsp;

Right you are&nbsp;Jon. The graph has been split so you can see the detail as the resistance changes very little between 50c and 100c. I checked a known good ect sensor and it is on 2150 ohms at&nbsp;20ish c. I can check my air temp sensor in the morning if you like.

Greg&nbsp;  
&nbsp; 

  
  

 
 
 
* * *
 **From:**"Jon Bartlett mail@jaybe.net [Syncro\_T3\_Australia]" \<Syncro\_T3\_Australia@yahoogroups.com\>  
 **To:**"Syncro\_T3\_Australia@yahoogroups.com" \<Syncro\_T3\_Australia@yahoogroups.com\>   
 **Sent:** Friday, 6 March 2015, 16:03  
 **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors  
  
 
  

&nbsp;

Thanks chaps. I think this is one graph though as the temp "x' axis is continuous. Just wondering if it applies to both air temp and water temp sensors? From what I have read it appears to be the case but the Bentley layout is confusing.

  
  

  

On 6 March 2015 at 13:39, Theo Weiss [teows@melbpc.org.au](mailto:teows@melbpc.org.au) [Syncro\_T3\_Australia] \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\> wrote:  

> > &nbsp;
> > 
> > Jon, Greg,
> > 
> > Yes, that’s how I read it.
> > 
> > Theo
> > 
> > &nbsp;
> > 
> > **From:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com) [mailto:[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)]  
> > **Sent:** 06 March 2015 07:20  
> > **To:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
> > **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> > 
> > &nbsp;
> > 
> > &nbsp; 
> > 
> > Jon, Its been a while since I have looked at this but in my morning haze I would say the diagram on the right&nbsp;half is for the coolant temp sensor and the left half is the ambient intake air temp. Greg E  
> > &nbsp; 
> > 
> >  
> > * * *
> > 
> > **From:**"Jon Bartlett [mail@jaybe.net](mailto:mail@jaybe.net) [Syncro\_T3\_Australia]" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> > **To:**"[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> > **Sent:** Thursday, 5 March 2015, 22:49  
> > **Subject:** [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> > 
> > &nbsp;
> > 
> > &nbsp; 
> > 
> > Evening All,
> > 
> > &nbsp;
> > 
> > I am working on a Syncro project and struggling to interpret the attached Bentley info. Looking at 24.45, does this read that the air flow temp sensor and the coolant temp sensor are essentially the same and have identical temp to resistance profile?
> > 
> > &nbsp;
> > 
> > Jon.
> > 
> > &nbsp;
> > 
> > &nbsp;
> > 
> > ![](cid:image001.png@01D05812.F4F818E0)
> > 
> > &nbsp;

---

<div class="post-metadata">

**Author:** ![jonbartlett](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/jonbartlett/32/12_2.png) [@jonbartlett](https://forum.syncro.com.au/u/jonbartlett)\
**Post date:** [8 March 2015 10:38 UTC](https://forum.syncro.com.au/t/bentley-question-temp-sensors/3078/7 "2015-03-08T10:38:12Z")

</div>

Thanks Greg. Sorry for the late reply. I just did the same test on my spare temp (water) sensor and got the same result. Would be good to confirm the air temp sensor but I can do this if you don't get chance. Presumably I can do this from the pins on the ECU plug rather than at the sensor direct?
  

  

> On 06/03/2015, at 5:11 PM, Greg Esposito [gregespo73@yahoo.com](mailto:gregespo73@yahoo.com) [Syncro\_T3\_Australia] \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\> wrote:
>   
> 
> > &nbsp;
> > 
> >   
> > 
> > Right you are&nbsp;Jon. The graph has been split so you can see the detail as the resistance changes very little between 50c and 100c. I checked a known good ect sensor and it is on 2150 ohms at&nbsp;20ish c. I can check my air temp sensor in the morning if you like.
> > 
> > Greg&nbsp;  
> > &nbsp; 
> > 
> >  
> >  
> >  
> > * * *
> > **From:**"Jon Bartlett [mail@jaybe.net](mailto:mail@jaybe.net) [Syncro\_T3\_Australia]" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> > **To:**"[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>   
> > **Sent:** Friday, 6 March 2015, 16:03  
> > **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors  
> >   
> >  
> >   
> > 
> > &nbsp;
> > 
> > Thanks chaps. I think this is one graph though as the temp "x' axis is continuous. Just wondering if it applies to both air temp and water temp sensors? From what I have read it appears to be the case but the Bentley layout is confusing.
> > 
> >   
> >   
> > 
> >   
> > 
> > On 6 March 2015 at 13:39, Theo Weiss [teows@melbpc.org.au](mailto:teows@melbpc.org.au) [Syncro\_T3\_Australia] \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\> wrote:  
> > 
> > > &nbsp;
> > > 
> > > Jon, Greg,
> > > 
> > > Yes, that’s how I read it.
> > > 
> > > Theo
> > > 
> > > &nbsp;
> > > 
> > > **From:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com) [mailto:[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)]  
> > > **Sent:** 06 March 2015 07:20  
> > > **To:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
> > > **Subject:** Re: [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> > > 
> > > &nbsp;
> > > 
> > > &nbsp; 
> > > 
> > > Jon, Its been a while since I have looked at this but in my morning haze I would say the diagram on the right&nbsp;half is for the coolant temp sensor and the left half is the ambient intake air temp. Greg E  
> > > &nbsp; 
> > > 
> > >  
> > > * * *
> > > 
> > > **From:**"Jon Bartlett [mail@jaybe.net](mailto:mail@jaybe.net) [Syncro\_T3\_Australia]" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> > > **To:**"[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)" \<[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)\>  
> > > **Sent:** Thursday, 5 March 2015, 22:49  
> > > **Subject:** [Syncro\_T3\_Australia] Bentley Question - Temp Sensors [1 Attachment]
> > > 
> > > &nbsp;
> > > 
> > > &nbsp; 
> > > 
> > > Evening All,
> > > 
> > > &nbsp;
> > > 
> > > I am working on a Syncro project and struggling to interpret the attached Bentley info. Looking at 24.45, does this read that the air flow temp sensor and the coolant temp sensor are essentially the same and have identical temp to resistance profile?
> > > 
> > > &nbsp;
> > > 
> > > Jon.
> > > 
> > > &nbsp;
> > > 
> > > &nbsp;
> > > 
> > > \<image001.png\>
> > > 
> > > &nbsp;
> > 
> >   
> > 
> >   
> >   
> > 
> >  
> >  
> > 
> >   
> > 
> > \<image001.png\>
