# clutch pressure plate instal

**URL:** <https://forum.syncro.com.au/t/clutch-pressure-plate-instal/1642>\
**Category:** Uncategorized\
**Created:** [23 September 2016 00:30 UTC](https://forum.syncro.com.au/t/clutch-pressure-plate-instal/1642 "2016-09-23T00:30:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![cathrich1](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/c/65b543/32.png) [@cathrich1](https://forum.syncro.com.au/u/cathrich1)\
**Post date:** [23 September 2016 00:30 UTC](https://forum.syncro.com.au/t/clutch-pressure-plate-instal/1642/1 "2016-09-23T00:30:05Z")

</div>

Hi all,

Fitted up the flywheel and clutch etc the other day. Factory specs on the bolts 110Nm for the fly wheel, 20Nm for the clutch pressure plate.

Have I mis-read this? 20Nm for the clutch (M8 bolt) seems very light on??

I'm inclined to bump that up a bit before I put the engine back in!

Richard

---

<div class="post-metadata">

**Author:** ![aaronjlewis71](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/a/8e7dd6/32.png) [@aaronjlewis71](https://forum.syncro.com.au/u/aaronjlewis71)\
**Post date:** [23 September 2016 01:18 UTC](https://forum.syncro.com.au/t/clutch-pressure-plate-instal/1642/2 "2016-09-23T01:18:15Z")

</div>

Shows 20Nm for water cooled 25Nm for air cooled and Diesel  
  
  
[Sent from Yahoo Mail for iPhone](https://yho.com/footer0)  
  

> On Friday, September 23, 2016, 10:00 am, cathrich1@yahoo.com.au [Syncro\_T3\_Australia] \<Syncro\_T3\_Australia@yahoogroups.com\> wrote:
> 
> > &nbsp;
> > 
> > Hi all,
> > 
> > Fitted up the flywheel and clutch etc the other day. Factory specs on the bolts 110Nm for the fly wheel, 20Nm for the clutch pressure plate.
> > 
> > Have I mis-read this? 20Nm for the clutch (M8 bolt) seems very light on??
> > 
> > I'm inclined to bump that up a bit before I put the engine back in!
> > 
> > Richard
> > 
> > >

---

<div class="post-metadata">

**Author:** ![syncro](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/syncro/32/344_2.png) [@syncro](https://forum.syncro.com.au/u/syncro)\
**Post date:** [23 September 2016 09:42 UTC](https://forum.syncro.com.au/t/clutch-pressure-plate-instal/1642/3 "2016-09-23T09:42:24Z")

</div>

That sounds OK to me.

---

<div class="post-metadata">

**Author:** ![cathrich1](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/c/65b543/32.png) [@cathrich1](https://forum.syncro.com.au/u/cathrich1)\
**Post date:** [23 September 2016 14:44 UTC](https://forum.syncro.com.au/t/clutch-pressure-plate-instal/1642/4 "2016-09-23T14:44:35Z")

</div>

Thanks all, guess it's by the book then!

Glad my torque wrench goes that low :)

Richard
