# R&R Starter motor

**URL:** <https://forum.syncro.com.au/t/r-r-starter-motor/259>\
**Category:** Uncategorized\
**Created:** [15 June 2006 14:28 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259 "2006-06-15T14:28:09Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [15 June 2006 14:28 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/1 "2006-06-15T14:28:09Z")

</div>

Gday ALL,  
Having starter motor trouble at the moment, could be bad connections   
causing it and/or trouble in the motor itself. I don't think it's the   
battery. I'm undecided whether to just take it to the mechanic/auto   
electrician and say "fix it" or have a go at removing it myself, then   
give it to the auto electrician to check. That way I can clean out   
all the crud in the vicinity and check/clean/lubricate the electrical   
connections and grounding while the starter is out.  
  
Trouble is space seems so tight to get at it and I can't even see   
both fixing bolts/nuts, let alone everything else that has to be   
shifted or dismantled to get it out. I've read up what little there   
is on the subject in Bentley's but at the moment it still looks a   
pretty daunting task.  
  
Has anyone done this and maybe has some helpful thoughts on this   
please. To be realistic, should I even attempt this? If so, are there   
special tools needed to get at the "hidden" fixings? Does the axle   
shaft have to be removed at both ends and are there re-assembly   
issues with this? Or would it be more prudent to simply take it to   
the experts to fix? Any thoughts would be appreciated. TIA. Cheers.  
  
Ken

---

<div class="post-metadata">

**Author:** ![kestelp](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/k/2acd7d/32.png) [@kestelp](https://forum.syncro.com.au/u/kestelp)\
**Post date:** [16 June 2006 03:48 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/2 "2006-06-16T03:48:26Z")

</div>

Hi Ken  
  
Double check the battery status & earthing connection under the   
seat. Also the keyswitch has been known to cause problems.  
  
Working on the starter is a pain witout first lowering the tranny.  
  
Details for that can be found at the USA syncro site:  
[http://autos.groups.yahoo.com/group/Syncro/files/technica/Transmissio](http://autos.groups.yahoo.com/group/Syncro/files/technica/Transmissio)  
n/  
  
Regards  
  
Peter  
  
  
  
  
  
--- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" \<unclekenz@...\>   
wrote:  

> \>  
> \> Gday ALL,  
> \> Having starter motor trouble at the moment, could be bad

connections   

> \> causing it and/or trouble in the motor itself. I don't think it's

the   

> \> battery. I'm undecided whether to just take it to the

mechanic/auto   

> \> electrician and say "fix it" or have a go at removing it myself,

then   

> \> give it to the auto electrician to check. That way I can clean out   
> \> all the crud in the vicinity and check/clean/lubricate the

electrical   

> \> connections and grounding while the starter is out.  
> \>   
> \> Trouble is space seems so tight to get at it and I can't even see   
> \> both fixing bolts/nuts, let alone everything else that has to be   
> \> shifted or dismantled to get it out. I've read up what little

there   

> \> is on the subject in Bentley's but at the moment it still looks a   
> \> pretty daunting task.  
> \>   
> \> Has anyone done this and maybe has some helpful thoughts on this   
> \> please. To be realistic, should I even attempt this? If so, are

there   

> \> special tools needed to get at the "hidden" fixings? Does the axle   
> \> shaft have to be removed at both ends and are there re-assembly   
> \> issues with this? Or would it be more prudent to simply take it to   
> \> the experts to fix? Any thoughts would be appreciated. TIA. Cheers.  
> \>   
> \> Ken  
> \>

---

<div class="post-metadata">

**Author:** ![syncroaustralia](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/s/e9a140/32.png) [@syncroaustralia](https://forum.syncro.com.au/u/syncroaustralia)\
**Post date:** [16 June 2006 06:44 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/3 "2006-06-16T06:44:03Z")

</div>

I think that the usual workshop procedure is to remove the diff lock mechanism then remove the starter, but dropping the gearbox would give good access.&nbsp; Most starter motor problems come down to the solenoid not pulling in because of a poor current path.

&nbsp;

Les

&nbsp;

> > ----- Original Message ----- 
> > 
> > **From:** [Ken](mailto:unclekenz@yahoo.com "unclekenz@yahoo.com") 
> > 
> > **To:** [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com "Syncro\_T3\_Australia@yahoogroups.com")
> > 
> > **Sent:** Friday, June 16, 2006 12:28 AM
> > 
> > **Subject:** [Syncro\_T3\_Australia] R&R Starter motor
> > 
> >   
> > 
> > Gday ALL,  
> > Having starter motor trouble at the moment, could be bad connections   
> > causing it and/or trouble in the motor itself. I don't think it's the   
> > battery. I'm undecided whether to just take it to the mechanic/auto   
> > electrician and say "fix it" or have a go at removing it myself, then   
> > give it to the auto electrician to check. That way I can clean out   
> > all the crud in the vicinity and check/clean/ lubricate the electrical   
> > connections and grounding while the starter is out.  
> >   
> > Trouble is space seems so tight to get at it and I can't even see   
> > both fixing bolts/nuts, let alone everything else that has to be   
> > shifted or dismantled to get it out. I've read up what little there   
> > is on the subject in Bentley's but at the moment it still looks a   
> > pretty daunting task.  
> >   
> > Has anyone done this and maybe has some helpful thoughts on this   
> > please. To be realistic, should I even attempt this? If so, are there   
> > special tools needed to get at the "hidden" fixings? Does the axle   
> > shaft have to be removed at both ends and are there re-assembly   
> > issues with this? Or would it be more prudent to simply take it to   
> > the experts to fix? Any thoughts would be appreciated. TIA. Cheers.  
> >   
> > Ken

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [16 June 2006 12:54 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/4 "2006-06-16T12:54:20Z")

</div>

Gday Peter,  
  
Everything else works as normal electrically. I've hooked up an extra  
battery to the syncro battery but makes no difference. The Syncro  
clutch-starts easily enough. So I think it's still a degraded connection  
somewhere in the starter circuitry or the starter is having a heart  
attack, which brings me back to where I started. What Les says about the  
solenoid makes sense.  
  
Lower the tranny eh. Bentleys doesn't mention that, but does suggest  
removing the drive axle.  
  
Oh well, looks like I better sleep on this. Maybe I can just always park  
at the top of a hill .. lol. Thanks all. Cheers.  
  
Ken  
  
  
  
  
--- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Peter" \<kestel.p@...\>  
wrote:  

> \>  
> \> Hi Ken  
> \>  
> \> Double check the battery status & earthing connection under the  
> \> seat. Also the keyswitch has been known to cause problems.  
> \>  
> \> Working on the starter is a pain witout first lowering the tranny.  
> \>  
> \> Details for that can be found at the USA syncro site:  
> \> [http://autos.groups.yahoo.com/group/Syncro/files/technica/Transmissio](http://autos.groups.yahoo.com/group/Syncro/files/technica/Transmissio)  
> \> n/  
> \>  
> \> Regards  
> \>  
> \> Peter  
> \>  
> \>  
> \>  
> \>  
> \>  
> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" unclekenz@  
> \> wrote:  
> \> \>  
> \> \> Gday ALL,  
> \> \> Having starter motor trouble at the moment, could be bad  
> \> connections  
> \> \> causing it and/or trouble in the motor itself. I don't think it's  
> \> the  
> \> \> battery. I'm undecided whether to just take it to the  
> \> mechanic/auto  
> \> \> electrician and say "fix it" or have a go at removing it myself,  
> \> then  
> \> \> give it to the auto electrician to check. That way I can clean out  
> \> \> all the crud in the vicinity and check/clean/lubricate the  
> \> electrical  
> \> \> connections and grounding while the starter is out.  
> \> \>  
> \> \> Trouble is space seems so tight to get at it and I can't even see  
> \> \> both fixing bolts/nuts, let alone everything else that has to be  
> \> \> shifted or dismantled to get it out. I've read up what little  
> \> there  
> \> \> is on the subject in Bentley's but at the moment it still looks a  
> \> \> pretty daunting task.  
> \> \>  
> \> \> Has anyone done this and maybe has some helpful thoughts on this  
> \> \> please. To be realistic, should I even attempt this? If so, are  
> \> there  
> \> \> special tools needed to get at the "hidden" fixings? Does the axle  
> \> \> shaft have to be removed at both ends and are there re-assembly  
> \> \> issues with this? Or would it be more prudent to simply take it to  
> \> \> the experts to fix? Any thoughts would be appreciated. TIA. Cheers.  
> \> \>  
> \> \> Ken  
> \> \>  
> \>

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [21 June 2006 12:04 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/5 "2006-06-21T12:04:10Z")

</div>

Gday all,  
Can anyone tell me how to tackle removing the rear fastener (bolt?) of   
the starter motor please. Is it an allen head bolt and you have to   
juggle an allen key up behind the starter motor from under the van or   
is it accessible from the engine bay after removing things like the air   
filter assembly etc? Or is this all wrong? Special tools needed?   
  
Any help appreciated. TIA. Cheers  
  
Ken

---

<div class="post-metadata">

**Author:** ![syncro\_experts](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/s/e8c25b/32.png) [@syncro\_experts](https://forum.syncro.com.au/u/syncro_experts)\
**Post date:** [21 June 2006 16:19 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/6 "2006-06-21T16:19:27Z")

</div>

--- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" \<unclekenz@...\> wrote:  

> \>  
> \> Gday all,  
> \> Can anyone tell me how to tackle removing the rear fastener (bolt?)

of   

> \> the starter motor please. Is it an allen head bolt and you have to   
> \> juggle an allen key up behind the starter motor from under the van or   
> \> is it accessible from the engine bay after removing things like the

air   

> \> filter assembly etc? Or is this all wrong? Special tools needed?   
> \>   
> \> Any help appreciated. TIA. Cheers  
> \>   
> \> Ken  
> \>

Hi Ken,  
  
what ´kind of engine? A 2.1 or 1,9 waterboxer?   
You have to unscrew the screws from the front gearbox-fastener and then   
drop the gear some inches, that you can reach the starter!   
  
Nevertheless you have to remove the air-filter and all other thins to   
reach the upper screw where the starter is fixed...  
  
No special tools needed!  
  
Hope this might help you?

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [22 June 2006 02:07 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/7 "2006-06-22T02:07:22Z")

</div>

Gday Dirk,  
  
Thanks for that. Yes it's a standard 2.1 WBX.  
  
From what I've read in my VAG workshop manual and Bentleys, both fail to  
describe a number of steps involved with the removal of the starter  
motor. Are they expecting assumed knowledge for this? I'm perplexed as  
to why they cover some but not all of the procedures to carry out this  
task.  
  
I'd be interested to know if someone out there has typed up a "Step by  
Step Procedure for the Compleat Idiot" for the removal of the Syncro  
starter motor. By way of example, John Muir's publication by that name  
for Beetle and Kombi air-cooled's is a godsend ... a grand shame he  
passed away.  
  
Any clues as to the existence of such a typed up procedure please  
anyone? TIA. Cheers.  
  
Ken  
  
  
  
  
  
  
--- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts" \<dirk@...\>  
wrote:  

> \>  
> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" unclekenz@ wrote:  
> \> \>  
> \> \> Gday all,  
> \> \> Can anyone tell me how to tackle removing the rear fastener (bolt?)  
> \> of  
> \> \> the starter motor please. Is it an allen head bolt and you have to  
> \> \> juggle an allen key up behind the starter motor from under the van

or  

> \> \> is it accessible from the engine bay after removing things like the  
> \> air  
> \> \> filter assembly etc? Or is this all wrong? Special tools needed?  
> \> \>  
> \> \> Any help appreciated. TIA. Cheers  
> \> \>  
> \> \> Ken  
> \> \>  
> \>  
> \>  
> \> Hi Ken,  
> \>  
> \> what ´kind of engine? A 2.1 or 1,9 waterboxer?  
> \> You have to unscrew the screws from the front gearbox-fastener and

then  

> \> drop the gear some inches, that you can reach the starter!  
> \>  
> \> Nevertheless you have to remove the air-filter and all other thins to  
> \> reach the upper screw where the starter is fixed...  
> \>  
> \> No special tools needed!  
> \>  
> \> Hope this might help you?  
> \>

---

<div class="post-metadata">

**Author:** ![syncro](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/syncro/32/344_2.png) [@syncro](https://forum.syncro.com.au/u/syncro)\
**Post date:** [22 June 2006 02:24 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/8 "2006-06-22T02:24:22Z")

</div>

Have you looked at page 27.13a and 27.13b of the Bentley?  
  
It gives a step by step procedure.  
  
  
  

> \> Ken \<[unclekenz@yahoo.com](mailto:unclekenz@yahoo.com)\> wrote:  
> \>   
> \>   
> \> Gday Dirk,  
> \>   
> \> Thanks for that. Yes it's a standard 2.1 WBX.  
> \>   
> \> From what I've read in my VAG workshop manual and Bentleys, both fail to  
> \> describe a number of steps involved with the removal of the starter  
> \> motor. Are they expecting assumed knowledge for this? I'm perplexed as  
> \> to why they cover some but not all of the procedures to carry out this  
> \> task.  
> \>   
> \> I'd be interested to know if someone out there has typed up a "Step by  
> \> Step Procedure for the Compleat Idiot" for the removal of the Syncro  
> \> starter motor. By way of example, John Muir's publication by that name  
> \> for Beetle and Kombi air-cooled's is a godsend ... a grand shame he  
> \> passed away.  
> \>   
> \> Any clues as to the existence of such a typed up procedure please  
> \> anyone? TIA. Cheers.  
> \>   
> \> Ken  
> \>   
> \>   
> \>   
> \>   
> \>   
> \>   
> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts" \<dirk@...\>  
> \> wrote:  
> \> \>  
> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" unclekenz@ wrote:  
> \> \> \>  
> \> \> \> Gday all,  
> \> \> \> Can anyone tell me how to tackle removing the rear fastener (bolt?)  
> \> \> of  
> \> \> \> the starter motor please. Is it an allen head bolt and you have to  
> \> \> \> juggle an allen key up behind the starter motor from under the van  
> \> or  
> \> \> \> is it accessible from the engine bay after removing things like the  
> \> \> air  
> \> \> \> filter assembly etc? Or is this all wrong? Special tools needed?  
> \> \> \>  
> \> \> \> Any help appreciated. TIA. Cheers  
> \> \> \>  
> \> \> \> Ken  
> \> \> \>  
> \> \>  
> \> \>  
> \> \> Hi Ken,  
> \> \>  
> \> \> what �kind of engine? A 2.1 or 1,9 waterboxer?  
> \> \> You have to unscrew the screws from the front gearbox-fastener and  
> \> then  
> \> \> drop the gear some inches, that you can reach the starter!  
> \> \>  
> \> \> Nevertheless you have to remove the air-filter and all other thins to  
> \> \> reach the upper screw where the starter is fixed...  
> \> \>  
> \> \> No special tools needed!  
> \> \>  
> \> \> Hope this might help you?  
> \> \>

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [22 June 2006 13:28 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/9 "2006-06-22T13:28:58Z")

</div>

Gday Phil,  
  
That's what I've been looking at all along and am still stumped, hence  
the pleas for help.  
  
The first part refers to removal of the top fixing bolt of the starter  
motor. I can't even see the top bolt, let alone remove it. That's why I  
asked for clues about where I need to go to access it to remove it.  
  
Others members have said something about getting the top bolt out from  
the engine bay. Not sure about this and Bentleys doesn't say, so I was  
wanting more info and confirmation if it is the case.  
  
Other members have said the transmission needs to be lowered to get the  
starter motor out. Not mentioned in Bentleys. True?  
  
At the moment I'm also unclear on swinging to one side the coolant  
hoses. I'm thinking that's not possible, rather, the hoses need to be  
removed to get working clearance. I'll take yet another look to try and  
resolve this point. I'm not quite ready yet to concurrantly address the  
issue of draining/refilling the coolant system.  
  
So Phil, I take it you've removed the starter motor at some stage. Then  
you may be in a position to clarify for me some of these queries ......  
thanks Phil. Cheers  
  
Ken  
  
  
  

> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@... wrote:  
> \>  
> \> Have you looked at page 27.13a and 27.13b of the Bentley?  
> \>  
> \> It gives a step by step procedure.  
> \>  
> \>  
> \>  
> \> \> Ken unclekenz@... wrote:  
> \> \>  
> \> \>  
> \> \> Gday Dirk,  
> \> \>  
> \> \> Thanks for that. Yes it's a standard 2.1 WBX.  
> \> \>  
> \> \> From what I've read in my VAG workshop manual and Bentleys, both  
> fail to  
> \> \> describe a number of steps involved with the removal of the starter  
> \> \> motor. Are they expecting assumed knowledge for this? I'm perplexed  
> as  
> \> \> to why they cover some but not all of the procedures to carry out  
> this  
> \> \> task.  
> \> \>  
> \> \> I'd be interested to know if someone out there has typed up a "Step  
> by  
> \> \> Step Procedure for the Compleat Idiot" for the removal of the Syncro  
> \> \> starter motor. By way of example, John Muir's publication by that  
> name  
> \> \> for Beetle and Kombi air-cooled's is a godsend ... a grand shame he  
> \> \> passed away.  
> \> \>  
> \> \> Any clues as to the existence of such a typed up procedure please  
> \> \> anyone? TIA. Cheers.  
> \> \>  
> \> \> Ken  
> \> \>  
> \> \>  
> \> \>  
> \> \>  
> \> \>  
> \> \>  
> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts" dirk@  
> \> \> wrote:  
> \> \> \>  
> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" unclekenz@  
> wrote:  
> \> \> \> \>  
> \> \> \> \> Gday all,  
> \> \> \> \> Can anyone tell me how to tackle removing the rear fastener  
> (bolt?)  
> \> \> \> of  
> \> \> \> \> the starter motor please. Is it an allen head bolt and you have  
> to  
> \> \> \> \> juggle an allen key up behind the starter motor from under the  
> van  
> \> \> or  
> \> \> \> \> is it accessible from the engine bay after removing things like  
> the  
> \> \> \> air  
> \> \> \> \> filter assembly etc? Or is this all wrong? Special tools needed?  
> \> \> \> \>  
> \> \> \> \> Any help appreciated. TIA. Cheers  
> \> \> \> \>  
> \> \> \> \> Ken  
> \> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \> Hi Ken,  
> \> \> \>  
> \> \> \> what ´kind of engine? A 2.1 or 1,9 waterboxer?  
> \> \> \> You have to unscrew the screws from the front gearbox-fastener and  
> \> \> then  
> \> \> \> drop the gear some inches, that you can reach the starter!  
> \> \> \>  
> \> \> \> Nevertheless you have to remove the air-filter and all other thins  
> to  
> \> \> \> reach the upper screw where the starter is fixed...  
> \> \> \>  
> \> \> \> No special tools needed!  
> \> \> \>  
> \> \> \> Hope this might help you?  
> \> \> \>  
> \>

---

<div class="post-metadata">

**Author:** ![syncro](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/syncro/32/344_2.png) [@syncro](https://forum.syncro.com.au/u/syncro)\
**Post date:** [23 June 2006 20:13 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/10 "2006-06-23T20:13:50Z")

</div>

No I haven't removed a starter before on a syncro, but it should be the same as any Kombi/Beetle.  
The top bolt is probably the same one that bolts the engine to the gearbox.  
It will be a 17mm head,  
  
  
  

> \> Ken \<[unclekenz@yahoo.com](mailto:unclekenz@yahoo.com)\> wrote:  
> \>   
> \>   
> \> Gday Phil,  
> \>   
> \> That's what I've been looking at all along and am still stumped, hence  
> \> the pleas for help.  
> \>   
> \> The first part refers to removal of the top fixing bolt of the starter  
> \> motor. I can't even see the top bolt, let alone remove it. That's why I  
> \> asked for clues about where I need to go to access it to remove it.  
> \>   
> \> Others members have said something about getting the top bolt out from  
> \> the engine bay. Not sure about this and Bentleys doesn't say, so I was  
> \> wanting more info and confirmation if it is the case.  
> \>   
> \> Other members have said the transmission needs to be lowered to get the  
> \> starter motor out. Not mentioned in Bentleys. True?  
> \>   
> \> At the moment I'm also unclear on swinging to one side the coolant  
> \> hoses. I'm thinking that's not possible, rather, the hoses need to be  
> \> removed to get working clearance. I'll take yet another look to try and  
> \> resolve this point. I'm not quite ready yet to concurrantly address the  
> \> issue of draining/refilling the coolant system.  
> \>   
> \> So Phil, I take it you've removed the starter motor at some stage. Then  
> \> you may be in a position to clarify for me some of these queries ......  
> \> thanks Phil. Cheers  
> \>   
> \> Ken  
> \>   
> \>   
> \>   
> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@... wrote:  
> \> \>  
> \> \> Have you looked at page 27.13a and 27.13b of the Bentley?  
> \> \>  
> \> \> It gives a step by step procedure.  
> \> \>  
> \> \>  
> \> \>  
> \> \> \> Ken unclekenz@... wrote:  
> \> \> \>  
> \> \> \>  
> \> \> \> Gday Dirk,  
> \> \> \>  
> \> \> \> Thanks for that. Yes it's a standard 2.1 WBX.  
> \> \> \>  
> \> \> \> From what I've read in my VAG workshop manual and Bentleys, both  
> \> fail to  
> \> \> \> describe a number of steps involved with the removal of the starter  
> \> \> \> motor. Are they expecting assumed knowledge for this? I'm perplexed  
> \> as  
> \> \> \> to why they cover some but not all of the procedures to carry out  
> \> this  
> \> \> \> task.  
> \> \> \>  
> \> \> \> I'd be interested to know if someone out there has typed up a "Step  
> \> by  
> \> \> \> Step Procedure for the Compleat Idiot" for the removal of the Syncro  
> \> \> \> starter motor. By way of example, John Muir's publication by that  
> \> name  
> \> \> \> for Beetle and Kombi air-cooled's is a godsend ... a grand shame he  
> \> \> \> passed away.  
> \> \> \>  
> \> \> \> Any clues as to the existence of such a typed up procedure please  
> \> \> \> anyone? TIA. Cheers.  
> \> \> \>  
> \> \> \> Ken  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts" dirk@  
> \> \> \> wrote:  
> \> \> \> \>  
> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" unclekenz@  
> \> wrote:  
> \> \> \> \> \>  
> \> \> \> \> \> Gday all,  
> \> \> \> \> \> Can anyone tell me how to tackle removing the rear fastener  
> \> (bolt?)  
> \> \> \> \> of  
> \> \> \> \> \> the starter motor please. Is it an allen head bolt and you have  
> \> to  
> \> \> \> \> \> juggle an allen key up behind the starter motor from under the  
> \> van  
> \> \> \> or  
> \> \> \> \> \> is it accessible from the engine bay after removing things like  
> \> the  
> \> \> \> \> air  
> \> \> \> \> \> filter assembly etc? Or is this all wrong? Special tools needed?  
> \> \> \> \> \>  
> \> \> \> \> \> Any help appreciated. TIA. Cheers  
> \> \> \> \> \>  
> \> \> \> \> \> Ken  
> \> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \> Hi Ken,  
> \> \> \> \>  
> \> \> \> \> what �kind of engine? A 2.1 or 1,9 waterboxer?  
> \> \> \> \> You have to unscrew the screws from the front gearbox-fastener and  
> \> \> \> then  
> \> \> \> \> drop the gear some inches, that you can reach the starter!  
> \> \> \> \>  
> \> \> \> \> Nevertheless you have to remove the air-filter and all other thins  
> \> to  
> \> \> \> \> reach the upper screw where the starter is fixed...  
> \> \> \> \>  
> \> \> \> \> No special tools needed!  
> \> \> \> \>  
> \> \> \> \> Hope this might help you?  
> \> \> \> \>  
> \> \>

---

<div class="post-metadata">

**Author:** ![kestelp](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/k/2acd7d/32.png) [@kestelp](https://forum.syncro.com.au/u/kestelp)\
**Post date:** [25 June 2006 08:39 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/11 "2006-06-25T08:39:24Z")

</div>

Ken  
  
SOme things are not meant to be easy. You might be able to work on   
the starter without lowering the tranny & I could imagine that with   
fancy multi-axial ring spanners (at $35 each) and long thin fingers   
you might get there.  
Personally I would allocate a few days & give myself the room to do   
the job easily by lowering the tranny first. Sure it is a lot more   
work however in the long run...  
  
I have learnt first hand that the Syncro does not give up easily.  
  
Regards  
  
PK  
  
  
  

> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@... wrote:  
> \>  
> \> No I haven't removed a starter before on a syncro, but it should   
> be the same as any Kombi/Beetle.  
> \> The top bolt is probably the same one that bolts the engine to the   
> gearbox.  
> \> It will be a 17mm head,  
> \>   
> \>   
> \>   
> \> \> Ken \<unclekenz@...\> wrote:  
> \> \>   
> \> \>   
> \> \> Gday Phil,  
> \> \>   
> \> \> That's what I've been looking at all along and am still stumped,   
> hence  
> \> \> the pleas for help.  
> \> \>   
> \> \> The first part refers to removal of the top fixing bolt of the   
> starter  
> \> \> motor. I can't even see the top bolt, let alone remove it.   
> That's why I  
> \> \> asked for clues about where I need to go to access it to remove   
> it.  
> \> \>   
> \> \> Others members have said something about getting the top bolt   
> out from  
> \> \> the engine bay. Not sure about this and Bentleys doesn't say, so   
> I was  
> \> \> wanting more info and confirmation if it is the case.  
> \> \>   
> \> \> Other members have said the transmission needs to be lowered to   
> get the  
> \> \> starter motor out. Not mentioned in Bentleys. True?  
> \> \>   
> \> \> At the moment I'm also unclear on swinging to one side the   
> coolant  
> \> \> hoses. I'm thinking that's not possible, rather, the hoses need   
> to be  
> \> \> removed to get working clearance. I'll take yet another look to   
> try and  
> \> \> resolve this point. I'm not quite ready yet to concurrantly   
> address the  
> \> \> issue of draining/refilling the coolant system.  
> \> \>   
> \> \> So Phil, I take it you've removed the starter motor at some   
> stage. Then  
> \> \> you may be in a position to clarify for me some of these   
> queries ......  
> \> \> thanks Phil. Cheers  
> \> \>   
> \> \> Ken  
> \> \>   
> \> \>   
> \> \>   
> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@ wrote:  
> \> \> \>  
> \> \> \> Have you looked at page 27.13a and 27.13b of the Bentley?  
> \> \> \>  
> \> \> \> It gives a step by step procedure.  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \> \> Ken unclekenz@ wrote:  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \> Gday Dirk,  
> \> \> \> \>  
> \> \> \> \> Thanks for that. Yes it's a standard 2.1 WBX.  
> \> \> \> \>  
> \> \> \> \> From what I've read in my VAG workshop manual and Bentleys,   
> both  
> \> \> fail to  
> \> \> \> \> describe a number of steps involved with the removal of the   
> starter  
> \> \> \> \> motor. Are they expecting assumed knowledge for this? I'm   
> perplexed  
> \> \> as  
> \> \> \> \> to why they cover some but not all of the procedures to   
> carry out  
> \> \> this  
> \> \> \> \> task.  
> \> \> \> \>  
> \> \> \> \> I'd be interested to know if someone out there has typed up   
> a "Step  
> \> \> by  
> \> \> \> \> Step Procedure for the Compleat Idiot" for the removal of   
> the Syncro  
> \> \> \> \> starter motor. By way of example, John Muir's publication by   
> that  
> \> \> name  
> \> \> \> \> for Beetle and Kombi air-cooled's is a godsend ... a grand   
> shame he  
> \> \> \> \> passed away.  
> \> \> \> \>  
> \> \> \> \> Any clues as to the existence of such a typed up procedure   
> please  
> \> \> \> \> anyone? TIA. Cheers.  
> \> \> \> \>  
> \> \> \> \> Ken  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts"   
> dirk@  
> \> \> \> \> wrote:  
> \> \> \> \> \>  
> \> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken"   
> unclekenz@  
> \> \> wrote:  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Gday all,  
> \> \> \> \> \> \> Can anyone tell me how to tackle removing the rear   
> fastener  
> \> \> (bolt?)  
> \> \> \> \> \> of  
> \> \> \> \> \> \> the starter motor please. Is it an allen head bolt and   
> you have  
> \> \> to  
> \> \> \> \> \> \> juggle an allen key up behind the starter motor from   
> under the  
> \> \> van  
> \> \> \> \> or  
> \> \> \> \> \> \> is it accessible from the engine bay after removing   
> things like  
> \> \> the  
> \> \> \> \> \> air  
> \> \> \> \> \> \> filter assembly etc? Or is this all wrong? Special tools   
> needed?  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Any help appreciated. TIA. Cheers  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Ken  
> \> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \> Hi Ken,  
> \> \> \> \> \>  
> \> \> \> \> \> what ´kind of engine? A 2.1 or 1,9 waterboxer?  
> \> \> \> \> \> You have to unscrew the screws from the front gearbox-  
> fastener and  
> \> \> \> \> then  
> \> \> \> \> \> drop the gear some inches, that you can reach the starter!  
> \> \> \> \> \>  
> \> \> \> \> \> Nevertheless you have to remove the air-filter and all   
> other thins  
> \> \> to  
> \> \> \> \> \> reach the upper screw where the starter is fixed...  
> \> \> \> \> \>  
> \> \> \> \> \> No special tools needed!  
> \> \> \> \> \>  
> \> \> \> \> \> Hope this might help you?  
> \> \> \> \> \>  
> \> \> \>  
> \>

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [30 June 2006 13:40 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/12 "2006-06-30T13:40:13Z")

</div>

Peter ... today the auto electrician confirmed the brushes are sticking,  
he did the tap tap tap on the starter motor and then voila! ... it  
started. So at least I know it's not a crook switch, or bad  
connection/wiring. Bite the bullet time? Cheers  
  
Ken  
  
  
--- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Peter" \<kestel.p@...\>  
wrote:  

> \>  
> \> Ken  
> \>  
> \> SOme things are not meant to be easy. You might be able to work on  
> \> the starter without lowering the tranny & I could imagine that with  
> \> fancy multi-axial ring spanners (at $35 each) and long thin fingers  
> \> you might get there.  
> \> Personally I would allocate a few days & give myself the room to do  
> \> the job easily by lowering the tranny first. Sure it is a lot more  
> \> work however in the long run...  
> \>  
> \> I have learnt first hand that the Syncro does not give up easily.  
> \>  
> \> Regards  
> \>  
> \> PK  
> \>  
> \>  
> \>  
> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@ wrote:  
> \> \>  
> \> \> No I haven't removed a starter before on a syncro, but it should  
> \> be the same as any Kombi/Beetle.  
> \> \> The top bolt is probably the same one that bolts the engine to the  
> \> gearbox.  
> \> \> It will be a 17mm head,  
> \> \>  
> \> \>  
> \> \>  
> \> \> \> Ken unclekenz@ wrote:  
> \> \> \>  
> \> \> \>  
> \> \> \> Gday Phil,  
> \> \> \>  
> \> \> \> That's what I've been looking at all along and am still stumped,  
> \> hence  
> \> \> \> the pleas for help.  
> \> \> \>  
> \> \> \> The first part refers to removal of the top fixing bolt of the  
> \> starter  
> \> \> \> motor. I can't even see the top bolt, let alone remove it.  
> \> That's why I  
> \> \> \> asked for clues about where I need to go to access it to remove  
> \> it.  
> \> \> \>  
> \> \> \> Others members have said something about getting the top bolt  
> \> out from  
> \> \> \> the engine bay. Not sure about this and Bentleys doesn't say, so  
> \> I was  
> \> \> \> wanting more info and confirmation if it is the case.  
> \> \> \>  
> \> \> \> Other members have said the transmission needs to be lowered to  
> \> get the  
> \> \> \> starter motor out. Not mentioned in Bentleys. True?  
> \> \> \>  
> \> \> \> At the moment I'm also unclear on swinging to one side the  
> \> coolant  
> \> \> \> hoses. I'm thinking that's not possible, rather, the hoses need  
> \> to be  
> \> \> \> removed to get working clearance. I'll take yet another look to  
> \> try and  
> \> \> \> resolve this point. I'm not quite ready yet to concurrantly  
> \> address the  
> \> \> \> issue of draining/refilling the coolant system.  
> \> \> \>  
> \> \> \> So Phil, I take it you've removed the starter motor at some  
> \> stage. Then  
> \> \> \> you may be in a position to clarify for me some of these  
> \> queries ......  
> \> \> \> thanks Phil. Cheers  
> \> \> \>  
> \> \> \> Ken  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@ wrote:  
> \> \> \> \>  
> \> \> \> \> Have you looked at page 27.13a and 27.13b of the Bentley?  
> \> \> \> \>  
> \> \> \> \> It gives a step by step procedure.  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \> \> Ken unclekenz@ wrote:  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \> Gday Dirk,  
> \> \> \> \> \>  
> \> \> \> \> \> Thanks for that. Yes it's a standard 2.1 WBX.  
> \> \> \> \> \>  
> \> \> \> \> \> From what I've read in my VAG workshop manual and Bentleys,  
> \> both  
> \> \> \> fail to  
> \> \> \> \> \> describe a number of steps involved with the removal of the  
> \> starter  
> \> \> \> \> \> motor. Are they expecting assumed knowledge for this? I'm  
> \> perplexed  
> \> \> \> as  
> \> \> \> \> \> to why they cover some but not all of the procedures to  
> \> carry out  
> \> \> \> this  
> \> \> \> \> \> task.  
> \> \> \> \> \>  
> \> \> \> \> \> I'd be interested to know if someone out there has typed up  
> \> a "Step  
> \> \> \> by  
> \> \> \> \> \> Step Procedure for the Compleat Idiot" for the removal of  
> \> the Syncro  
> \> \> \> \> \> starter motor. By way of example, John Muir's publication by  
> \> that  
> \> \> \> name  
> \> \> \> \> \> for Beetle and Kombi air-cooled's is a godsend ... a grand  
> \> shame he  
> \> \> \> \> \> passed away.  
> \> \> \> \> \>  
> \> \> \> \> \> Any clues as to the existence of such a typed up procedure  
> \> please  
> \> \> \> \> \> anyone? TIA. Cheers.  
> \> \> \> \> \>  
> \> \> \> \> \> Ken  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts"  
> \> dirk@  
> \> \> \> \> \> wrote:  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken"  
> \> unclekenz@  
> \> \> \> wrote:  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Gday all,  
> \> \> \> \> \> \> \> Can anyone tell me how to tackle removing the rear  
> \> fastener  
> \> \> \> (bolt?)  
> \> \> \> \> \> \> of  
> \> \> \> \> \> \> \> the starter motor please. Is it an allen head bolt and  
> \> you have  
> \> \> \> to  
> \> \> \> \> \> \> \> juggle an allen key up behind the starter motor from  
> \> under the  
> \> \> \> van  
> \> \> \> \> \> or  
> \> \> \> \> \> \> \> is it accessible from the engine bay after removing  
> \> things like  
> \> \> \> the  
> \> \> \> \> \> \> air  
> \> \> \> \> \> \> \> filter assembly etc? Or is this all wrong? Special tools  
> \> needed?  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Any help appreciated. TIA. Cheers  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Ken  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Hi Ken,  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> what ´kind of engine? A 2.1 or 1,9 waterboxer?  
> \> \> \> \> \> \> You have to unscrew the screws from the front gearbox-  
> \> fastener and  
> \> \> \> \> \> then  
> \> \> \> \> \> \> drop the gear some inches, that you can reach the starter!  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Nevertheless you have to remove the air-filter and all  
> \> other thins  
> \> \> \> to  
> \> \> \> \> \> \> reach the upper screw where the starter is fixed...  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> No special tools needed!  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Hope this might help you?  
> \> \> \> \> \> \>  
> \> \> \> \>  
> \> \>  
> \>

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [30 June 2006 13:43 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/13 "2006-06-30T13:43:57Z")

</div>

Peter ... today the auto electrician confirmed the brushes are sticking,  
he did the tap tap tap on the starter motor and then voila! ... it  
started. So at least I know it's not a crook switch, or bad  
connection/wiring. Bite the bullet time? Cheers  
  
Ken  
  
  
--- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Peter" \<kestel.p@...\>  
wrote:  

> \>  
> \> Ken  
> \>  
> \> SOme things are not meant to be easy. You might be able to work on  
> \> the starter without lowering the tranny & I could imagine that with  
> \> fancy multi-axial ring spanners (at $35 each) and long thin fingers  
> \> you might get there.  
> \> Personally I would allocate a few days & give myself the room to do  
> \> the job easily by lowering the tranny first. Sure it is a lot more  
> \> work however in the long run...  
> \>  
> \> I have learnt first hand that the Syncro does not give up easily.  
> \>  
> \> Regards  
> \>  
> \> PK  
> \>  
> \>  
> \>  
> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@ wrote:  
> \> \>  
> \> \> No I haven't removed a starter before on a syncro, but it should  
> \> be the same as any Kombi/Beetle.  
> \> \> The top bolt is probably the same one that bolts the engine to the  
> \> gearbox.  
> \> \> It will be a 17mm head,  
> \> \>  
> \> \>  
> \> \>  
> \> \> \> Ken unclekenz@ wrote:  
> \> \> \>  
> \> \> \>  
> \> \> \> Gday Phil,  
> \> \> \>  
> \> \> \> That's what I've been looking at all along and am still stumped,  
> \> hence  
> \> \> \> the pleas for help.  
> \> \> \>  
> \> \> \> The first part refers to removal of the top fixing bolt of the  
> \> starter  
> \> \> \> motor. I can't even see the top bolt, let alone remove it.  
> \> That's why I  
> \> \> \> asked for clues about where I need to go to access it to remove  
> \> it.  
> \> \> \>  
> \> \> \> Others members have said something about getting the top bolt  
> \> out from  
> \> \> \> the engine bay. Not sure about this and Bentleys doesn't say, so  
> \> I was  
> \> \> \> wanting more info and confirmation if it is the case.  
> \> \> \>  
> \> \> \> Other members have said the transmission needs to be lowered to  
> \> get the  
> \> \> \> starter motor out. Not mentioned in Bentleys. True?  
> \> \> \>  
> \> \> \> At the moment I'm also unclear on swinging to one side the  
> \> coolant  
> \> \> \> hoses. I'm thinking that's not possible, rather, the hoses need  
> \> to be  
> \> \> \> removed to get working clearance. I'll take yet another look to  
> \> try and  
> \> \> \> resolve this point. I'm not quite ready yet to concurrantly  
> \> address the  
> \> \> \> issue of draining/refilling the coolant system.  
> \> \> \>  
> \> \> \> So Phil, I take it you've removed the starter motor at some  
> \> stage. Then  
> \> \> \> you may be in a position to clarify for me some of these  
> \> queries ......  
> \> \> \> thanks Phil. Cheers  
> \> \> \>  
> \> \> \> Ken  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@ wrote:  
> \> \> \> \>  
> \> \> \> \> Have you looked at page 27.13a and 27.13b of the Bentley?  
> \> \> \> \>  
> \> \> \> \> It gives a step by step procedure.  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \> \> Ken unclekenz@ wrote:  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \> Gday Dirk,  
> \> \> \> \> \>  
> \> \> \> \> \> Thanks for that. Yes it's a standard 2.1 WBX.  
> \> \> \> \> \>  
> \> \> \> \> \> From what I've read in my VAG workshop manual and Bentleys,  
> \> both  
> \> \> \> fail to  
> \> \> \> \> \> describe a number of steps involved with the removal of the  
> \> starter  
> \> \> \> \> \> motor. Are they expecting assumed knowledge for this? I'm  
> \> perplexed  
> \> \> \> as  
> \> \> \> \> \> to why they cover some but not all of the procedures to  
> \> carry out  
> \> \> \> this  
> \> \> \> \> \> task.  
> \> \> \> \> \>  
> \> \> \> \> \> I'd be interested to know if someone out there has typed up  
> \> a "Step  
> \> \> \> by  
> \> \> \> \> \> Step Procedure for the Compleat Idiot" for the removal of  
> \> the Syncro  
> \> \> \> \> \> starter motor. By way of example, John Muir's publication by  
> \> that  
> \> \> \> name  
> \> \> \> \> \> for Beetle and Kombi air-cooled's is a godsend ... a grand  
> \> shame he  
> \> \> \> \> \> passed away.  
> \> \> \> \> \>  
> \> \> \> \> \> Any clues as to the existence of such a typed up procedure  
> \> please  
> \> \> \> \> \> anyone? TIA. Cheers.  
> \> \> \> \> \>  
> \> \> \> \> \> Ken  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts"  
> \> dirk@  
> \> \> \> \> \> wrote:  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken"  
> \> unclekenz@  
> \> \> \> wrote:  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Gday all,  
> \> \> \> \> \> \> \> Can anyone tell me how to tackle removing the rear  
> \> fastener  
> \> \> \> (bolt?)  
> \> \> \> \> \> \> of  
> \> \> \> \> \> \> \> the starter motor please. Is it an allen head bolt and  
> \> you have  
> \> \> \> to  
> \> \> \> \> \> \> \> juggle an allen key up behind the starter motor from  
> \> under the  
> \> \> \> van  
> \> \> \> \> \> or  
> \> \> \> \> \> \> \> is it accessible from the engine bay after removing  
> \> things like  
> \> \> \> the  
> \> \> \> \> \> \> air  
> \> \> \> \> \> \> \> filter assembly etc? Or is this all wrong? Special tools  
> \> needed?  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Any help appreciated. TIA. Cheers  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Ken  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Hi Ken,  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> what ´kind of engine? A 2.1 or 1,9 waterboxer?  
> \> \> \> \> \> \> You have to unscrew the screws from the front gearbox-  
> \> fastener and  
> \> \> \> \> \> then  
> \> \> \> \> \> \> drop the gear some inches, that you can reach the starter!  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Nevertheless you have to remove the air-filter and all  
> \> other thins  
> \> \> \> to  
> \> \> \> \> \> \> reach the upper screw where the starter is fixed...  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> No special tools needed!  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Hope this might help you?  
> \> \> \> \> \> \>  
> \> \> \> \>  
> \> \>  
> \>

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [4 July 2006 12:57 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/14 "2006-07-04T12:57:57Z")

</div>

Well as Bill Clinton once said (erm, he lied) .... "READ MY LIPS!" I  
can now tell you all it's official ......  
  
..... to remove a syncro starter motor, there is NO need to lower the  
transmission NOR remove the axle shaft.  
  
Tomorrow I'm taking it to the auto electrician for a good seeing to.  
Cheers.  
  
Ken F.Q.S.S.M.R.  
  
  
  
  

> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken" \<unclekenz@...\> wrote:  
> \>  
> \>  
> \> Peter ... today the auto electrician confirmed the brushes are  
> sticking,  
> \> he did the tap tap tap on the starter motor and then voila! ... it  
> \> started. So at least I know it's not a crook switch, or bad  
> \> connection/wiring. Bite the bullet time? Cheers  
> \>  
> \> Ken  
> \>  
> \>  
> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Peter" kestel.p@  
> \> wrote:  
> \> \>  
> \> \> Ken  
> \> \>  
> \> \> SOme things are not meant to be easy. You might be able to work on  
> \> \> the starter without lowering the tranny & I could imagine that with  
> \> \> fancy multi-axial ring spanners (at $35 each) and long thin fingers  
> \> \> you might get there.  
> \> \> Personally I would allocate a few days & give myself the room to do  
> \> \> the job easily by lowering the tranny first. Sure it is a lot more  
> \> \> work however in the long run...  
> \> \>  
> \> \> I have learnt first hand that the Syncro does not give up easily.  
> \> \>  
> \> \> Regards  
> \> \>  
> \> \> PK  
> \> \>  
> \> \>  
> \> \>  
> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@ wrote:  
> \> \> \>  
> \> \> \> No I haven't removed a starter before on a syncro, but it should  
> \> \> be the same as any Kombi/Beetle.  
> \> \> \> The top bolt is probably the same one that bolts the engine to the  
> \> \> gearbox.  
> \> \> \> It will be a 17mm head,  
> \> \> \>  
> \> \> \>  
> \> \> \>  
> \> \> \> \> Ken unclekenz@ wrote:  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \> Gday Phil,  
> \> \> \> \>  
> \> \> \> \> That's what I've been looking at all along and am still stumped,  
> \> \> hence  
> \> \> \> \> the pleas for help.  
> \> \> \> \>  
> \> \> \> \> The first part refers to removal of the top fixing bolt of the  
> \> \> starter  
> \> \> \> \> motor. I can't even see the top bolt, let alone remove it.  
> \> \> That's why I  
> \> \> \> \> asked for clues about where I need to go to access it to remove  
> \> \> it.  
> \> \> \> \>  
> \> \> \> \> Others members have said something about getting the top bolt  
> \> \> out from  
> \> \> \> \> the engine bay. Not sure about this and Bentleys doesn't say, so  
> \> \> I was  
> \> \> \> \> wanting more info and confirmation if it is the case.  
> \> \> \> \>  
> \> \> \> \> Other members have said the transmission needs to be lowered to  
> \> \> get the  
> \> \> \> \> starter motor out. Not mentioned in Bentleys. True?  
> \> \> \> \>  
> \> \> \> \> At the moment I'm also unclear on swinging to one side the  
> \> \> coolant  
> \> \> \> \> hoses. I'm thinking that's not possible, rather, the hoses need  
> \> \> to be  
> \> \> \> \> removed to get working clearance. I'll take yet another look to  
> \> \> try and  
> \> \> \> \> resolve this point. I'm not quite ready yet to concurrantly  
> \> \> address the  
> \> \> \> \> issue of draining/refilling the coolant system.  
> \> \> \> \>  
> \> \> \> \> So Phil, I take it you've removed the starter motor at some  
> \> \> stage. Then  
> \> \> \> \> you may be in a position to clarify for me some of these  
> \> \> queries ......  
> \> \> \> \> thanks Phil. Cheers  
> \> \> \> \>  
> \> \> \> \> Ken  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \>  
> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), plander@ wrote:  
> \> \> \> \> \>  
> \> \> \> \> \> Have you looked at page 27.13a and 27.13b of the Bentley?  
> \> \> \> \> \>  
> \> \> \> \> \> It gives a step by step procedure.  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \> \> \> \> Ken unclekenz@ wrote:  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Gday Dirk,  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Thanks for that. Yes it's a standard 2.1 WBX.  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> From what I've read in my VAG workshop manual and Bentleys,  
> \> \> both  
> \> \> \> \> fail to  
> \> \> \> \> \> \> describe a number of steps involved with the removal of the  
> \> \> starter  
> \> \> \> \> \> \> motor. Are they expecting assumed knowledge for this? I'm  
> \> \> perplexed  
> \> \> \> \> as  
> \> \> \> \> \> \> to why they cover some but not all of the procedures to  
> \> \> carry out  
> \> \> \> \> this  
> \> \> \> \> \> \> task.  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> I'd be interested to know if someone out there has typed up  
> \> \> a "Step  
> \> \> \> \> by  
> \> \> \> \> \> \> Step Procedure for the Compleat Idiot" for the removal of  
> \> \> the Syncro  
> \> \> \> \> \> \> starter motor. By way of example, John Muir's publication by  
> \> \> that  
> \> \> \> \> name  
> \> \> \> \> \> \> for Beetle and Kombi air-cooled's is a godsend ... a grand  
> \> \> shame he  
> \> \> \> \> \> \> passed away.  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Any clues as to the existence of such a typed up procedure  
> \> \> please  
> \> \> \> \> \> \> anyone? TIA. Cheers.  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> Ken  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \>  
> \> \> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "syncro\_experts"  
> \> \> dirk@  
> \> \> \> \> \> \> wrote:  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> --- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), "Ken"  
> \> \> unclekenz@  
> \> \> \> \> wrote:  
> \> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> \> Gday all,  
> \> \> \> \> \> \> \> \> Can anyone tell me how to tackle removing the rear  
> \> \> fastener  
> \> \> \> \> (bolt?)  
> \> \> \> \> \> \> \> of  
> \> \> \> \> \> \> \> \> the starter motor please. Is it an allen head bolt and  
> \> \> you have  
> \> \> \> \> to  
> \> \> \> \> \> \> \> \> juggle an allen key up behind the starter motor from  
> \> \> under the  
> \> \> \> \> van  
> \> \> \> \> \> \> or  
> \> \> \> \> \> \> \> \> is it accessible from the engine bay after removing  
> \> \> things like  
> \> \> \> \> the  
> \> \> \> \> \> \> \> air  
> \> \> \> \> \> \> \> \> filter assembly etc? Or is this all wrong? Special tools  
> \> \> needed?  
> \> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> \> Any help appreciated. TIA. Cheers  
> \> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> \> Ken  
> \> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Hi Ken,  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> what ´kind of engine? A 2.1 or 1,9 waterboxer?  
> \> \> \> \> \> \> \> You have to unscrew the screws from the front gearbox-  
> \> \> fastener and  
> \> \> \> \> \> \> then  
> \> \> \> \> \> \> \> drop the gear some inches, that you can reach the starter!  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Nevertheless you have to remove the air-filter and all  
> \> \> other thins  
> \> \> \> \> to  
> \> \> \> \> \> \> \> reach the upper screw where the starter is fixed...  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> No special tools needed!  
> \> \> \> \> \> \> \>  
> \> \> \> \> \> \> \> Hope this might help you?  
> \> \> \> \> \> \> \>  
> \> \> \> \> \>  
> \> \> \>  
> \> \>  
> \>

---

<div class="post-metadata">

**Author:** ![witoke2](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@witoke2](https://forum.syncro.com.au/u/witoke2)\
**Post date:** [5 July 2006 12:43 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/15 "2006-07-05T12:43:23Z")

</div>

Just to set the record straight here, the quote "read my lips" cannot   
be attributed to Bill Clinton. In fact it was the first President   
Bush's campaign promise not to raise taxes that is the origin of this   
quote. You are right that he lied as he found himself forced to raise   
taxes to help pay for the HUGE deficits run up by Ronald reagan.

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [6 July 2006 10:16 UTC](https://forum.syncro.com.au/t/r-r-starter-motor/259/16 "2006-07-06T10:16:13Z")

</div>

Yes I wondered if I'd get picked up on this straight after I posted it.  
Nice to put history to right.  
  
Heh and I believe they STILL have HUGE deficits!  
  
  
--- In [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com), Alexander Sfakianos  
\<witoke@...\> wrote:  

> \>  
> \> Just to set the record straight here, the quote "read my lips" cannot  
> \> be attributed to Bill Clinton. In fact it was the first President  
> \> Bush's campaign promise not to raise taxes that is the origin of this  
> \> quote. You are right that he lied as he found himself forced to raise  
> \> taxes to help pay for the HUGE deficits run up by Ronald reagan.  
> \>
