# re: VW Technical Bulletin 95-03 - A/C retrofitting

**URL:** <https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406>\
**Category:** Uncategorized\
**Created:** [26 December 2009 12:39 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406 "2009-12-26T12:39:46Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [26 December 2009 12:39 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/1 "2009-12-26T12:39:46Z")

</div>

Les, Phill and ALL,  
This official bulletin would be worth adding to the file collection, it has useful part and volume references for a/c equipped T3 vans (read vanagon), including it seems they use similar compressors, in particular the Sanden SD 510 and SD 709, both of which Prestige used, so there is that commonality.  
&nbsp;  
Goto: [http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf](http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf)  
&nbsp;  
For compatibility of the genuine VAG bracket,&nbsp;check the compressor mounted on that bracket. Check the distance between the&nbsp;compressor case mounting&nbsp;"ears" or lugs, it&nbsp;should be precisely 83.3mm, as it is for the Prestige bracket. After that, then the correct distance dimension for the twin pulley alignment may have to be checked.  
&nbsp;  
See the attached pics and appended dimension.  
&nbsp;  
Ken&nbsp;  
&nbsp;  
&nbsp;  
  

* * *
Find out how [Use Messenger in your Hotmail inbox](http://windowslive.ninemsn.com.au/hotmail/article/823454/web-im-for-hotmail-is-here)

---

<div class="post-metadata">

**Author:** ![syncro](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/syncro/32/344_2.png) [@syncro](https://forum.syncro.com.au/u/syncro)\
**Post date:** [26 December 2009 20:10 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/2 "2009-12-26T20:10:05Z")

</div>

Well I can see a fault with that a/c.  
The belt has fallen off!  
  
  
  

> \> Ken Garratt \<[unclekenz@hotmail.com](mailto:unclekenz@hotmail.com)\> wrote:  
> \>   
> \>   
> \> Les, Phill and ALL,  
> \>   
> \> This official bulletin would be worth adding to the file collection, it   
> \> has useful part and volume references for a/c equipped T3 vans (read   
> \> vanagon), including it seems they use similar compressors, in particular   
> \> the Sanden SD 510 and SD 709, both of which Prestige used, so there is   
> \> that commonality.  
> \>   
> \>   
> \>   
> \> Goto:   
> \> [http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf](http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf)  
> \>   
> \>   
> \>   
> \> For compatibility of the genuine VAG bracket, check the compressor   
> \> mounted on that bracket. Check the distance between the compressor case   
> \> mounting "ears" or lugs, it should be precisely 83.3mm, as it is for the   
> \> Prestige bracket. After that, then the correct distance dimension for   
> \> the twin pulley alignment may have to be checked.  
> \>   
> \>   
> \>   
> \> See the attached pics and appended dimension.  
> \>   
> \>   
> \>   
> \> Ken   
> \>   
> \>   
> \>   
> \>   
> \>   
> \> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> \> Use Messenger in your Hotmail inbox Find out how  
> \> [http://windowslive.ninemsn.com.au/hotmail/article/823454/web-im-for-hotma](http://windowslive.ninemsn.com.au/hotmail/article/823454/web-im-for-hotma)  
> \> il-is-here

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [26 December 2009 23:29 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/3 "2009-12-26T23:29:30Z")

</div>

Nope ... didn't fall off.  
It was assisted.  
Ken  
  
  
-----Original Message-----  
From: \<[plander@optusnet.com.au](mailto:plander@optusnet.com.au)\>  
Sent: Sunday, 27 December 2009 7:10 AM  
To: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
Subject: Re: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting  
  
  
Well I can see a fault with that a/c.  
 The belt has fallen off!  
  

> \> Ken Garratt \<[unclekenz@hotmail.com](mailto:unclekenz@hotmail.com)\> wrote:  
> \>  
> \>  
> \> Les, Phill and ALL,  
> \>  
> \> This official bulletin would be worth adding to the file collection, it  
> \> has useful part and volume references for a/c equipped T3 vans (read  
> \> vanagon), including it seems they use similar compressors, in particular  
> \> the Sanden SD 510 and SD 709, both of which Prestige used, so there is  
> \> that commonality.  
> \>  
> \>  
> \>  
> \> Goto:  
> \> [http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf](http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf)  
> \>  
> \>  
> \>  
> \> For compatibility of the genuine VAG bracket, check the compressor  
> \> mounted on that bracket. Check the distance between the compressor case  
> \> mounting "ears" or lugs, it should be precisely 83.3mm, as it is for the  
> \> Prestige bracket. After that, then the correct distance dimension for  
> \> the twin pulley alignment may have to be checked.  
> \>  
> \>  
> \>  
> \> See the attached pics and appended dimension.  
> \>  
> \>  
> \>  
> \> Ken  
> \>  
> \>  
> \>  
> \>  
> \>  
> \> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> \> Use Messenger in your Hotmail inbox Find out how  
> \> [http://windowslive.ninemsn.com.au/hotmail/article/823454/web-im-for-hotma](http://windowslive.ninemsn.com.au/hotmail/article/823454/web-im-for-hotma)  
> \> il-is-here

---

<div class="post-metadata">

**Author:** ![syncroaustralia](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/s/e9a140/32.png) [@syncroaustralia](https://forum.syncro.com.au/u/syncroaustralia)\
**Post date:** [26 December 2009 23:36 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/4 "2009-12-26T23:36:51Z")

</div>

Ken,

I just **_have_** to ask – what lives in the ice cream container?

Les

&nbsp;

 
* * *
 

**From:** Syncro\_T3\_Australia@yahoogroups.com [mailto: Syncro\_T3\_Australia@yahoogroups.com] **On Behalf Of** Ken Garratt  
 **Sent:** 26 December 2009 23:40  
 **To:** Syncro \_T3\_Australia forum  
 **Subject:** [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting

&nbsp;

&nbsp;

Les, Phill and ALL,  
This official bulletin would be worth adding to the file collection, it has useful part and volume references for a/c equipped T3 vans (read vanagon), including it seems they use similar compressors, in particular the Sanden SD 510 and SD 709, both of which Prestige used, so there is that commonality.  
&nbsp;  
Goto: [http://faculty. ccp.edu/faculty/ dreed/Campingart /vanagon/ vwretrofit. pdf](http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf)  
&nbsp;  
For compatibility of the genuine VAG bracket,&nbsp;check the compressor mounted on that bracket. Check the distance between the&nbsp;compressor case mounting&nbsp;"ears" or lugs, it&nbsp;should be precisely 83.3mm, as it is for the Prestige bracket. After that, then the correct distance dimension for the twin pulley alignment may have to be checked.  
&nbsp;  
See the attached pics and appended dimension.  
&nbsp;  
Ken&nbsp;  
&nbsp;  
&nbsp;

 
* * *
 

Find out how [Use Messenger in your Hotmail inbox](http://windowslive.ninemsn.com.au/hotmail/article/823454/web-im-for-hotmail-is-here)

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [27 December 2009 01:14 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/5 "2009-12-27T01:14:13Z")

</div>

mmmmm .... not sure Les. I'd have to go take a look. Even those who know my van don't fully appreciate its potential as an extensive mobile storage/sensory discovery tour. A show & tell could take weeks .. haha  
Ken  
  
  
-----Original Message-----  
From: Les Harris \<[leslieharris@optusnet.com.au](mailto:leslieharris@optusnet.com.au)\>  
Sent: Sunday, 27 December 2009 10:37 AM  
To: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
Subject: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting  
  
  
Ken,  
I just have to ask - what lives in the ice cream container?  
Les  
  
  
From: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com) [mailto:[Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)] On Behalf Of Ken Garratt  
 Sent: 26 December 2009 23:40  
 To: Syncro \_T3\_Australia forum  
 Subject: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting  
  
  
Les, Phill and ALL,  
 This official bulletin would be worth adding to the file collection, it has useful part and volume references for a/c equipped T3 vans (read vanagon), including it seems they use similar compressors, in particular the Sanden SD 510 and SD 709, both of which Prestige used, so there is that commonality.  
  
 Goto: [http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf](http://faculty.ccp.edu/faculty/dreed/Campingart/vanagon/vwretrofit.pdf)  
  
 For compatibility of the genuine VAG bracket, check the compressor mounted on that bracket. Check the distance between the compressor case mounting "ears" or lugs, it should be precisely 83.3mm, as it is for the Prestige bracket. After that, then the correct distance dimension for the twin pulley alignment may have to be checked.  
  
 See the attached pics and appended dimension.  
  
 Ken   
  
  
  
Find out how Use Messenger in your Hotmail inbox

---

<div class="post-metadata">

**Author:** ![syncro](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/syncro/32/344_2.png) [@syncro](https://forum.syncro.com.au/u/syncro)\
**Post date:** [27 December 2009 03:44 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/6 "2009-12-27T03:44:12Z")

</div>

Nope ... didn't fall off.  

> \> It was assisted.  
> \> Ken

Why??????

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [27 December 2009 04:06 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/7 "2009-12-27T04:06:39Z")

</div>

erm ... didn't want to wear it out.  
  
  
  
-----Original Message-----  
From: \<[plander@optusnet.com.au](mailto:plander@optusnet.com.au)\>  
Sent: Sunday, 27 December 2009 2:44 PM  
To: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
Subject: Re: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting  
  
  
  
 Nope ... didn't fall off.  

> \> It was assisted.  
> \> Ken

 Why??????

---

<div class="post-metadata">

**Author:** ![syncro](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/syncro/32/344_2.png) [@syncro](https://forum.syncro.com.au/u/syncro)\
**Post date:** [27 December 2009 04:25 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/8 "2009-12-27T04:25:58Z")

</div>

Very bad thing to do.  
  
  
  

> \> Ken Garratt \<[unclekenz@hotmail.com](mailto:unclekenz@hotmail.com)\> wrote:  
> \>   
> \>   
> \> erm ... didn't want to wear it out.  
> \>   
> \>   
> \>   
> \> -----Original Message-----  
> \> From: \<[plander@optusnet.com.au](mailto:plander@optusnet.com.au)\>  
> \> Sent: Sunday, 27 December 2009 2:44 PM  
> \> To: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
> \> Subject: Re: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 -   
> \> A/C retrofitting  
> \>   
> \>   
> \>   
> \> Nope ... didn't fall off.  
> \> \> It was assisted.  
> \> \> Ken  
> \>   
> \> Why??????  
> \>   
> \>   
> \>   
> \> ------------------------------------  
> \>   
> \> Yahoo! Groups Links  
> \>   
> \>   
> \>

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [27 December 2009 08:13 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/9 "2009-12-27T08:13:21Z")

</div>

mmmmm ... silly people eh thinking that's the thing to do. I wonder where they got that idea? ... the mind boggles.  
  
following much needed tlc to my ac, then I'd strive to do as you say ... but not a moment earlier.  
Ken  
  
  
-----Original Message-----  
From: \<[plander@optusnet.com.au](mailto:plander@optusnet.com.au)\>  
Sent: Sunday, 27 December 2009 5:41 PM  
To: [unclekenz@hotmail.com](mailto:unclekenz@hotmail.com)  
Subject: Re: RE: RE: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting  
  
Your air con should be used weekly or it stuffs the compressor and causes leaks. I know of many people who thought that the belt causes a load, so they removed it in winter. Then they reconnected it and no more air con.  
  
 There is no load until the air is switched on.  
  
  
  

> \> Ken Garratt \<[unclekenz@hotmail.com](mailto:unclekenz@hotmail.com)\> wrote:  
> \>  
> \> hhmmmm .... why's that?  
> \>  
> \> -----Original Message-----  
> \> From: \<[plander@optusnet.com.au](mailto:plander@optusnet.com.au)\>  
> \> Sent: Sunday, 27 December 2009 3:26 PM  
> \> To: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
> \> Subject: Re: RE: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin  
> \> 95-03 - A/C retrofitting  
> \>  
> \>   
> \> Very bad thing to do.  
> \>  
> \> \> Ken Garratt \<[unclekenz@hotmail.com](mailto:unclekenz@hotmail.com)\> wrote:  
> \> \>  
> \> \>  
> \> \> erm ... didn't want to wear it out.  
> \> \>  
> \> \>  
> \> \>  
> \> \> -----Original Message-----  
> \> \> From: \<[plander@optusnet.com.au](mailto:plander@optusnet.com.au)\>  
> \> \> Sent: Sunday, 27 December 2009 2:44 PM  
> \> \> To: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
> \> \> Subject: Re: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin  
> \> 95-03 -  
> \> \> A/C retrofitting  
> \> \>  
> \> \>  
> \> \>  
> \> \> Nope ... didn't fall off.  
> \> \> \> It was assisted.  
> \> \> \> Ken  
> \> \>  
> \> \> Why??????  
> \> \>  
> \> \>  
> \> \>  
> \> \> ------------------------------------  
> \> \>  
> \> \> Yahoo! Groups Links  
> \> \>  
> \> \>  
> \> \>  
> \>

---

<div class="post-metadata">

**Author:** ![syncroaustralia](https://forum.syncro.com.au/letter_avatar_proxy/v4/letter/s/e9a140/32.png) [@syncroaustralia](https://forum.syncro.com.au/u/syncroaustralia)\
**Post date:** [27 December 2009 22:22 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/10 "2009-12-27T22:22:37Z")

</div>

Ken,

For a functioning air conditioner, leaving the belt on is a no-load situation.&nbsp; For a non-functioning air conditioner, you might as well remove the belt.

Regarding the compressor, the seals need to be kept wet by the refrigerant to prevent them drying and allowing refrigerant to escape past the seals.&nbsp; Most manufacturers will include an instruction in their owner’s handbook to run the compressor once a week for several minutes to achieve this.&nbsp; Some manufacturers go a bit further and wire the air conditioner into the reverse gear selection light so that the compressor runs while the vehicle is in reverse.&nbsp; Since most vehicles will use reverse several times a week, this achieves the desired end of keeping the refrigerant circulating and thus keeping the seals wet.&nbsp; It follows that this should be done during the winter months, so removing the belt during winter is thoroughly counter-productive.

Compressors can be plagued by another problem called cold leak.&nbsp; The system will accept gassing up and perform perfectly.&nbsp; Next morning, it won’t even start because every last molecule of gas has leaked out overnight.&nbsp; I had this happen with a new Tarago.

Les

&nbsp;

-----Original Message-----  
From: Syncro\_T3\_Australia@yahoogroups.com [mailto: Syncro\_T3\_Australia@yahoogroups.com] On Behalf Of Ken Garratt   
Sent: 27 December 2009 19:13  
To: syncro\_t3\_australia@yahoogroups.com   
Subject: RE: RE: RE: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting

&nbsp;

mmmmm ... silly people eh thinking that's the thing to do. I wonder where they got that idea? ... the mind boggles.

&nbsp;

following much needed tlc to my ac, then I'd strive to do as you say ... but not a moment earlier.

Ken

&nbsp;

&nbsp;

-----Original Message-----

From: \<plander@optusnet.com.au\>

Sent: Sunday, 27 December 2009 5:41 PM

To: unclekenz@hotmail.com

Subject: Re: RE: RE: RE: [Syncro\_T3\_Australia] re: VW Technical Bulletin 95-03 - A/C retrofitting

&nbsp;

Your air con should be used weekly or it stuffs the compressor and causes leaks. I know of many people who thought that the belt causes a load, so they removed it in winter. Then they reconnected it and no more air con.

&nbsp;

&nbsp;There is no load until the air is switched on.

&nbsp;

&nbsp;

&nbsp;

---

<div class="post-metadata">

**Author:** ![unclekenz](https://forum.syncro.com.au/user_avatar/forum.syncro.com.au/unclekenz/32/33_2.png) [@unclekenz](https://forum.syncro.com.au/u/unclekenz)\
**Post date:** [28 December 2009 01:04 UTC](https://forum.syncro.com.au/t/re-vw-technical-bulletin-95-03-a-c-retrofitting/3406/11 "2009-12-28T01:04:11Z")

</div>

Les,  
Thanks for that ... very interesting. I can very readily accept that the fundamental issue for those of us who don't use the syncro as a daily/weekly/fortnightly driver is the root cause of ac seal failures, especially in conjunction with a 20yo system & multiple owners.  
  
So I know I'm not alone in this scenario. Mine had no cooling when I bought it, still hasn't, hence my comments.  
  
I take it then, no one deduced that your 2nd sentence is my circumstance?   
Cheers.  
Ken  
  
  
  
-----Original Message-----  
From: Les Harris \<[leslieharris@optusnet.com.au](mailto:leslieharris@optusnet.com.au)\>  
Sent: Monday, 28 December 2009 9:22 AM  
To: [Syncro\_T3\_Australia@yahoogroups.com](mailto:Syncro_T3_Australia@yahoogroups.com)  
Subject: [Syncro\_T3\_Australia] Air Conditioners  
  
  
  
[The entire original message is not included]
