Square high beam

Hi all, 

One of my square high beam lights has a crack.
Does anyone know where to get one from?

Thanks

Tom 

Hi tom

From memory the same light went onto an old falcon, cant remember which one but i think it was a fairlane

brian

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Thomas Mischler
Sent: Wednesday, 2 May 2012 11:32 AM
To: Syncro_T3_Australia@yahoogroups.com
Subject: [Syncro_T3_Australia] Square high beam

 

 

Hi all, 

 

One of my square high beam lights has a crack.

Does anyone know where to get one from?

 

Thanks

 

Tom 

Tom,
Can you simply repair it with super glue?

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

Otherwise, high beams comprise a left and right hand pair.
Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam

 

Hi all, 

One of my square high beam lights has a crack.
Does anyone know where to get one from?

Thanks

Tom 

Try volksbahn autos Pendle hill   bob

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Ken Garratt
Sent: Wednesday, 2 May 2012 3:17 PM
To: _T3_Australia forum Syncro
Subject: RE: [Syncro_T3_Australia] Square high beam

 

 

Tom,

Can you simply repair it with super glue?

 

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

 

Otherwise, high beams comprise a left and right hand pair.

Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

 

Cheers.

Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam

 

 

Hi all, 

 

One of my square high beam lights has a crack.

Does anyone know where to get one from?

 

Thanks

 

Tom 

 

If it is an XC or XD Falcon there too big.
Just campers has brand newies,I have some second hand ones.
BenC

--- In Syncro_T3_Australia@yahoogroups.com, "wendy and brian" <wendyandbrian7@...> wrote:
>
> Hi tom
>
> From memory the same light went onto an old falcon, cant remember which one
> but i think it was a fairlane
>
> brian
>
>
>
> From: Syncro_T3_Australia@yahoogroups.com
> [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Thomas Mischler
> Sent: Wednesday, 2 May 2012 11:32 AM
> To: Syncro_T3_Australia@yahoogroups.com
> Subject: [Syncro_T3_Australia] Square high beam
>
>
>
>
>
> Hi all,
>
>
>
> One of my square high beam lights has a crack.
>
> Does anyone know where to get one from?
>
>
>
> Thanks
>
>
>
> Tom
>
> Ken Garratt <unclekenz@hotmail.com> wrote:
>
. Just go by the part
> number, not where its placed, given USA is LHD.So part no. 533 941 061 -
> http://www.van-cafe.com/home/van_1223689737929/page_408_1053/left_hi-beam
> _housing.htmlOr part no. 533 941 062 -


There is no LHD/RHD with high beams. They are all the same.
The high beam lights are from a Scirroco, hence the 533 part number.

Phill
Im not going to argue with that.
BenC

--- In Syncro_T3_Australia@yahoogroups.com, plander@... wrote:
>
>
>
>
>
> > Ken Garratt <unclekenz@...> wrote:
> >
> . Just go by the part
> > number, not where its placed, given USA is LHD.So part no. 533 941 061 -
> > http://www.van-cafe.com/home/van_1223689737929/page_408_1053/left_hi-beam
> > _housing.htmlOr part no. 533 941 062 -
>
>
> There is no LHD/RHD with high beams. They are all the same.
> The high beam lights are from a Scirroco, hence the 533 part number.
>
> Phill
>
Mmmmm Scirroco, I had one of those. Black gtx II. Great car. Flooring it on the on ramp of the M1 with the moon roof open was '80 motoring at its finest. Greg E

From: Ben <bencroft96@yahoo.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Thursday, 3 May 2012 8:46 AM
Subject: Re: [Syncro_T3_Australia] Square high beam

 
Im not going to argue with that.
BenC

--- In Syncro_T3_Australia@yahoogroups.com, plander@... wrote:
>
>
>
>
>
> > Ken Garratt <unclekenz@...> wrote:
> >
> . Just go by the part
> > number, not where its placed, given USA is LHD.So part no. 533 941 061 -
> > http://www.van-cafe.com/home/van_1223689737929/page_408_1053/left_hi-beam
> > _housing.htmlOr part no. 533 941 062 -
>
>
> There is no LHD/RHD with high beams. They are all the same.
> The high beam lights are from a Scirroco, hence the 533 part number.
>
> Phill
>



> greg esposito <gregespo73@yahoo.com> wrote:
>
> Mmmmm Scirroco, I had one of those. Black gtx II. Great car. Flooring it
> on the on ramp of the M1 with the moon roof open was '80 motoring at its
> finest. Greg E
>

Did you keep the headlights?

Phill
Tom,
May I repeat what I advised you earlier, as below.  Please advise me your findings.

"high beams comprise a left and right hand pair."

Cheers.
Ken



To: syncro_t3_australia@yahoogroups.com
From: unclekenz@hotmail.com
Date: Wed, 2 May 2012 15:16:55 +1000
Subject: RE: [Syncro_T3_Australia] Square high beam

 

Tom,
Can you simply repair it with super glue?

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

Otherwise, high beams comprise a left and right hand pair.
Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam

 

Hi all, 

One of my square high beam lights has a crack.
Does anyone know where to get one from?

Thanks

Tom 


inconveniently, all four lights are unique to their position.

and the plastic adjuster thingey's like to break of course..
sometimes those are available.

generally ...going to round headlights or a South African headlight and grill set up is the way to go.

there are terrific large round headlights from Bus Depot that work just great, and not expensive at all.
Decent T3 round headlight grills are a bit hard to find though, if wanting to just upgrade to single large round headlights ..which work better than the rectangular headlight system.

On 5/2/2012 7:39 PM, Ken Garratt wrote:

Tom,
May I repeat what I advised you earlier, as below. Please advise me your findings.

"high beams comprise a left and right hand pair."

Cheers.
Ken



To: syncro_t3_australia@yahoogroups.com
From: unclekenz@hotmail.com
Date: Wed, 2 May 2012 15:16:55 +1000
Subject: RE: [Syncro_T3_Australia] Square high beam


Tom,
Can you simply repair it with super glue?

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

Otherwise, high beams comprise a left and right hand pair.
Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam


Hi all,

One of my square high beam lights has a crack.
Does anyone know where to get one from?

Thanks

Tom


Hi Ken,

The situation is as follows:
Have (had) 2 SYNCROs
Pop Top has just been sold roadworthy-- all good.
The other('permanent high top' done by Trakka 20 years ago) needs roadworthy in the near future: eg. broken light- rusty door step - and many other things
Rang Burwin Motors in Melbourne for new lens - not available
Spare parts gave me the Ph. No for Volkswerke in Melb - they quoted $100 for second hand.:-(
Have not ordered from anyone yet.
I look forward to getting the high top going again
Cheers
Tom


From: Ken Garratt <unclekenz@hotmail.com>
To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
Sent: Thursday, 3 May 2012 12:39 PM
Subject: RE: [Syncro_T3_Australia] Square high beam

 
Tom,
May I repeat what I advised you earlier, as below.  Please advise me your findings.

"high beams comprise a left and right hand pair."

Cheers.
Ken



To: syncro_t3_australia@yahoogroups.com
From: unclekenz@hotmail.com
Date: Wed, 2 May 2012 15:16:55 +1000
Subject: RE: [Syncro_T3_Australia] Square high beam

 

Tom,
Can you simply repair it with super glue?

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

Otherwise, high beams comprise a left and right hand pair.
Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam

 

Hi all, 

One of my square high beam lights has a crack.
Does anyone know where to get one from?

Thanks

Tom 




No, just the wistful memories.

From: "plander@optusnet.com.au" <plander@optusnet.com.au>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Thursday, 3 May 2012 10:18 AM
Subject: Re: Re: [Syncro_T3_Australia] Square high beam

 


> greg esposito <gregespo73@yahoo.com> wrote:
>
> Mmmmm Scirroco, I had one of those. Black gtx II. Great car. Flooring it
> on the on ramp of the M1 with the moon roof open was '80 motoring at its
> finest. Greg E
>

Did you keep the headlights?

Phill


Tom,
You could spend ages and running up your phone bill searching locally for a high beam, probably hard to find, even at a wrecker.
Or as advertised, have it shipped from Van Cafe to your front door in 7-10 days ... say around $100 incl. shipping, maybe less.
Any that look fogged up, just poke a stick with a rag on it inside and work it around. They clean up good.
Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Thu, 3 May 2012 00:48:52 -0700
Subject: Re: [Syncro_T3_Australia] Square high beam

 

Hi Ken,

The situation is as follows:
Have (had) 2 SYNCROs
Pop Top has just been sold roadworthy-- all good.
The other('permanent high top' done by Trakka 20 years ago) needs roadworthy in the near future: eg. broken light- rusty door step - and many other things
Rang Burwin Motors in Melbourne for new lens - not available
Spare parts gave me the Ph. No for Volkswerke in Melb - they quoted $100 for second hand.:-(
Have not ordered from anyone yet.
I look forward to getting the high top going again
Cheers
Tom


From: Ken Garratt <unclekenz@hotmail.com>
To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
Sent: Thursday, 3 May 2012 12:39 PM
Subject: RE: [Syncro_T3_Australia] Square high beam

 
Tom,
May I repeat what I advised you earlier, as below.  Please advise me your findings.

"high beams comprise a left and right hand pair."

Cheers.
Ken



To: syncro_t3_australia@yahoogroups.com
From: unclekenz@hotmail.com
Date: Wed, 2 May 2012 15:16:55 +1000
Subject: RE: [Syncro_T3_Australia] Square high beam

 

Tom,
Can you simply repair it with super glue?

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

Otherwise, high beams comprise a left and right hand pair.
Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam

 

Hi all, 

One of my square high beam lights has a crack.
Does anyone know where to get one from?

Thanks

Tom 





Thanks Ken,

Tom


From: Ken Garratt <unclekenz@hotmail.com>
To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
Sent: Friday, 4 May 2012 12:33 AM
Subject: RE: [Syncro_T3_Australia] Square high beam

 
Tom,
You could spend ages and running up your phone bill searching locally for a high beam, probably hard to find, even at a wrecker.
Or as advertised, have it shipped from Van Cafe to your front door in 7-10 days ... say around $100 incl. shipping, maybe less.
Any that look fogged up, just poke a stick with a rag on it inside and work it around. They clean up good.
Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Thu, 3 May 2012 00:48:52 -0700
Subject: Re: [Syncro_T3_Australia] Square high beam

 

Hi Ken,

The situation is as follows:
Have (had) 2 SYNCROs
Pop Top has just been sold roadworthy-- all good.
The other('permanent high top' done by Trakka 20 years ago) needs roadworthy in the near future: eg. broken light- rusty door step - and many other things
Rang Burwin Motors in Melbourne for new lens - not available
Spare parts gave me the Ph. No for Volkswerke in Melb - they quoted $100 for second hand.:-(
Have not ordered from anyone yet.
I look forward to getting the high top going again
Cheers
Tom


From: Ken Garratt <unclekenz@hotmail.com>
To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
Sent: Thursday, 3 May 2012 12:39 PM
Subject: RE: [Syncro_T3_Australia] Square high beam

 
Tom,
May I repeat what I advised you earlier, as below.  Please advise me your findings.

"high beams comprise a left and right hand pair."

Cheers.
Ken



To: syncro_t3_australia@yahoogroups.com
From: unclekenz@hotmail.com
Date: Wed, 2 May 2012 15:16:55 +1000
Subject: RE: [Syncro_T3_Australia] Square high beam

 

Tom,
Can you simply repair it with super glue?

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

Otherwise, high beams comprise a left and right hand pair.
Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

Cheers.
Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam

 

Hi all, 

One of my square high beam lights has a crack.
Does anyone know where to get one from?

Thanks

Tom 







To be legal, they have to be ADR 46 compliant so you would need to establish that whatever is on offer is for RH drive vehicles.

Les

 


From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Thomas Mischler
Sent: 04 May 2012 12:35
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: [Syncro_T3_Australia] Square high beam

 

Thanks Ken,

 

Tom

 


From: Ken Garratt <unclekenz@hotmail.com>
To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
Sent: Friday, 4 May 2012 12:33 AM
Subject: RE: [Syncro_T3_Australia] Square high beam

 

 

Tom,

You could spend ages and running up your phone bill searching locally for a high beam, probably hard to find, even at a wrecker.

Or as advertised, have it shipped from Van Cafe to your front door in 7-10 days ... say around $100 incl. shipping, maybe less.

Any that look fogged up, just poke a stick with a rag on it inside and work it around. They clean up good.

Cheers.

Try mullers in Sydney bob

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Thomas Mischler
Sent: Thursday, 3 May 2012 5:49 PM
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: [Syncro_T3_Australia] Square high beam

 

 

Hi Ken,

 

The situation is as follows:

Have (had) 2 SYNCROs

Pop Top has just been sold roadworthy-- all good.

The other('permanent high top' done by Trakka 20 years ago) needs roadworthy in the near future: eg. broken light- rusty door step - and many other things

Rang Burwin Motors in Melbourne for new lens - not available

Spare parts gave me the Ph. No for Volkswerke in Melb - they quoted $100 for second hand.:-(

Have not ordered from anyone yet.

I look forward to getting the high top going again

Cheers

Tom

 


From: Ken Garratt <unclekenz@hotmail.com>
To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
Sent: Thursday, 3 May 2012 12:39 PM
Subject: RE: [Syncro_T3_Australia] Square high beam

 

 

Tom,

May I repeat what I advised you earlier, as below.  Please advise me your findings.

 

"high beams comprise a left and right hand pair."

 

Cheers.

Ken

 


To: syncro_t3_australia@yahoogroups.com
From: unclekenz@hotmail.com
Date: Wed, 2 May 2012 15:16:55 +1000
Subject: RE: [Syncro_T3_Australia] Square high beam

 

 

Tom,

Can you simply repair it with super glue?

 

Try your local dealer and report back here your success/failure and pricing please. Could be novel.

 

Otherwise, high beams comprise a left and right hand pair.

Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.

 

Cheers.

Ken


To: Syncro_T3_Australia@yahoogroups.com
From: energysustained@ymail.com
Date: Tue, 1 May 2012 18:31:57 -0700
Subject: [Syncro_T3_Australia] Square high beam

 

 

Hi all, 

 

One of my square high beam lights has a crack.

Does anyone know where to get one from?

 

Thanks

 

Tom 

 

 

 

Hi Tom,

Is your high top the gold luxury one featured in "Camper and Bus" a few months back? I like the Trakka high top it followed the design similar to the Dehler, a German yacht maker. I imagine they are becoming rather rare and Trakka through all the luxury trim at them. I have a friend who has a T3 for spare parts. Exactly which light is it you are after and how much do you want to pay. I see him Thursday and am picking up a part for myself. I drive a 1990 Trakka pop top Syncro. Ein tolles Auto. Thats german for a great car.

Cheers Dave



--- Ir Syncro_T3_Australia@yahoogroups.com, Thomas Mischler <energysustained@...> wrote:
>
> Thanks Ken,
>
> Tom
>
>
> ________________________________
> From: Ken Garratt <unclekenz@...>
> To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
> Sent: Friday, 4 May 2012 12:33 AM
> Subject: RE: [Syncro_T3_Australia] Square high beam
>
>
> Â
> Tom,
> You could spend ages and running up your phone bill searching locally for a high beam, probably hard to find, even at a wrecker.
> Or as advertised, have it shipped from Van Cafe to your front door in 7-10 days ... say around $100 incl. shipping, maybe less.
> Any that look fogged up, just poke a stick with a rag on it inside and work it around. They clean up good.
> Cheers.
> Ken
>
>
>
> ________________________________
> To: Syncro_T3_Australia@yahoogroups.com
> From: energysustained@...
> Date: Thu, 3 May 2012 00:48:52 -0700
> Subject: Re: [Syncro_T3_Australia] Square high beam
>
> Â
>
>
> Hi Ken,
>
> The situation is as follows:
> Have (had) 2 SYNCROs
> Pop Top has just been sold roadworthy-- all good.
> The other('permanent high top' done by Trakka 20 years ago) needs roadworthy in the near future:Â eg.broken light- rusty door step - and many other things
> Rang Burwin Motors in Melbourne for new lens - not available
> Spare parts gave me the Ph. No for Volkswerke in Melb - they quoted $100 for second hand.:-(
> Have not ordered from anyone yet.
> I look forward to getting the high top going again
> Cheers
> Tom
>
>
> ________________________________
> From: Ken Garratt <unclekenz@...>
> To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
> Sent: Thursday, 3 May 2012 12:39 PM
> Subject: RE: [Syncro_T3_Australia] Square high beam
>
>
> Â
> Tom,
> May I repeat what I advised you earlier, as below. Â Please advise me your findings.
>
> "high beams comprise a left and right hand pair."
>
> Cheers.
> Ken
>
>
>
>
> ________________________________
> To: syncro_t3_australia@yahoogroups.com
> From: unclekenz@...
> Date: Wed, 2 May 2012 15:16:55 +1000
> Subject: RE: [Syncro_T3_Australia] Square high beam
>
> Â
>
>
> Tom,
> Can you simply repair it with super glue?
>
> Try your local dealer and report back here your success/failure and pricing please. Could be novel.
>
> Otherwise, high beams comprise a left and right hand pair.
> Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.
> So part no. 533 941 061 - http://www.van-cafe.com/home/van_1223689737929/page_408_1053/left_hi-beam_housing.html
> Or part no. 533 941 062 - http://www.van-cafe.com/home/van_1223689737929/page_266_1053/right_hi-beam_housing.html
>
> Cheers.
> Ken
>
>
>
> ________________________________
> To: Syncro_T3_Australia@yahoogroups.com
> From: energysustained@...
> Date: Tue, 1 May 2012 18:31:57 -0700
> Subject: [Syncro_T3_Australia] Square high beam
>
> Â
>
>
> Hi all,Â
>
> One of my square high beam lights has a crack.
> Does anyone know where to get one from?
>
> Thanks
>
> TomÂ
>
Hi Dave,

Mine is not a luxury one, but the top is from a German ambulance and looks rather sophisticated.(double shell fibre glass and rather heavy).
It looks like it has been made by a yacht maker.
It still had the wiring loom for the emergency lights and other services when I had it put on  20 years ago.
I did the camper conversion myself. It has been sitting around for along time and needs a lot of attention.
It is not registered and not roadworthy @ present 
I am after the left high beam. I would pay $60 to $75.
And I also understand also what Vorsprung durch Technik means. 
Cheers Tom ;-)






From: David <davidleibmann@yahoo.com.au>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Monday, 7 May 2012 4:30 PM
Subject: [Syncro_T3_Australia] Re: Square high beam

 

Hi Tom,

Is your high top the gold luxury one featured in "Camper and Bus" a few months back? I like the Trakka high top it followed the design similar to the Dehler, a German yacht maker. I imagine they are becoming rather rare and Trakka through all the luxury trim at them. I have a friend who has a T3 for spare parts. Exactly which light is it you are after and how much do you want to pay. I see him Thursday and am picking up a part for myself. I drive a 1990 Trakka pop top Syncro. Ein tolles Auto. Thats german for a great car.

Cheers Dave

--- Ir Syncro_T3_Australia@yahoogroups.com, Thomas Mischler <energysustained@...> wrote:
>
> Thanks Ken,
>
> Tom
>
>
> ________________________________
> From: Ken Garratt <unclekenz@...>
> To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
> Sent: Friday, 4 May 2012 12:33 AM
> Subject: RE: [Syncro_T3_Australia] Square high beam
>
>
>  
> Tom,
> You could spend ages and running up your phone bill searching locally for a high beam, probably hard to find, even at a wrecker.
> Or as advertised, have it shipped from Van Cafe to your front door in 7-10 days ... say around $100 incl. shipping, maybe less.
> Any that look fogged up, just poke a stick with a rag on it inside and work it around. They clean up good.
> Cheers.
> Ken
>
>
>
> ________________________________
> To: Syncro_T3_Australia@yahoogroups.com
> From: energysustained@...
> Date: Thu, 3 May 2012 00:48:52 -0700
> Subject: Re: [Syncro_T3_Australia] Square high beam
>
>  
>
>
> Hi Ken,
>
> The situation is as follows:
> Have (had) 2 SYNCROs
> Pop Top has just been sold roadworthy-- all good.
> The other('permanent high top' done by Trakka 20 years ago) needs roadworthy in the near future: eg.broken light- rusty door step - and many other things
> Rang Burwin Motors in Melbourne for new lens - not available
> Spare parts gave me the Ph. No for Volkswerke in Melb - they quoted $100 for second hand.:-(
> Have not ordered from anyone yet.
> I look forward to getting the high top going again
> Cheers
> Tom
>
>
> ________________________________
> From: Ken Garratt <unclekenz@...>
> To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
> Sent: Thursday, 3 May 2012 12:39 PM
> Subject: RE: [Syncro_T3_Australia] Square high beam
>
>
>  
> Tom,
> May I repeat what I advised you earlier, as below.  Please advise me your findings.
>
> "high beams comprise a left and right hand pair."
>
> Cheers.
> Ken
>
>
>
>
> ________________________________
> To: syncro_t3_australia@yahoogroups.com
> From: unclekenz@...
> Date: Wed, 2 May 2012 15:16:55 +1000
> Subject: RE: [Syncro_T3_Australia] Square high beam
>
>  
>
>
> Tom,
> Can you simply repair it with super glue?
>
> Try your local dealer and report back here your success/failure and pricing please. Could be novel.
>
> Otherwise, high beams comprise a left and right hand pair.
> Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.
> So part no. 533 941 061 - http://www.van-cafe.com/home/van_1223689737929/page_408_1053/left_hi-beam_housing.html
> Or part no. 533 941 062 - http://www.van-cafe.com/home/van_1223689737929/page_266_1053/right_hi-beam_housing.html
>
> Cheers.
> Ken
>
>
>
> ________________________________
> To: Syncro_T3_Australia@yahoogroups.com
> From: energysustained@...
> Date: Tue, 1 May 2012 18:31:57 -0700
> Subject: [Syncro_T3_Australia] Square high beam
>
>  
>
>
> Hi all, 
>
> One of my square high beam lights has a crack.
> Does anyone know where to get one from?
>
> Thanks
>
> Tom 
>



Hi Tom,
I`ll see if there is a left high beam in good condition and let you know this weekend. Like most windows in Germany they are double glazed for better insulation and well made, like your high roof no doubt. Best of luck, or viel Spass with the project.
til then
Dave

--- In Syncro_T3_Australia@yahoogroups.com, Thomas Mischler <energysustained@...> wrote:
>
> Hi Dave,
>
> Mine is not a luxury one, but the top is from a German ambulance and looks rather sophisticated.(double shell fibre glass and rather heavy).
> It looks like it has been made by a yacht maker.
> It still had the wiring loom for the emergency lights and other services when I had it put on  20 years ago.
> I did the camper conversion myself. It has been sitting around for along time and needs a lot of attention.
> It is not registered and not roadworthy @ presentÂ
> I am after the left high beam. I would pay $60 to $75.
> And I also understand also what VorsprungdurchTechnik means.Â
>
> Cheers Tom ;-)
>
>
>
>
>
>
> ________________________________
> From: David <davidleibmann@...>
> To: Syncro_T3_Australia@yahoogroups.com
> Sent: Monday, 7 May 2012 4:30 PM
> Subject: [Syncro_T3_Australia] Re: Square high beam
>
>
> Â
>
> Hi Tom,
>
> Is your high top the gold luxury one featured in "Camper and Bus" a few months back? I like the Trakka high top it followed the design similar to the Dehler, a German yacht maker. I imagine they are becoming rather rare and Trakka through all the luxury trim at them. I have a friend who has a T3 for spare parts. Exactly which light is it you are after and how much do you want to pay. I see him Thursday and am picking up a part for myself. I drive a 1990 Trakka pop top Syncro. Eintolles Auto. Thatsgerman for a great car.
>
> Cheers Dave
>
> --- Ir Syncro_T3_Australia@yahoogroups.com, Thomas Mischler <energysustained@> wrote:
> >
> > Thanks Ken,
> >
> > Tom
> >
> >
> > ________________________________
> > From: Ken Garratt <unclekenz@>
> > To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
> > Sent: Friday, 4 May 2012 12:33 AM
> > Subject: RE: [Syncro_T3_Australia] Square high beam
> >
> >
> > ÂÂ
> > Tom,
> > You could spend ages and running up your phone bill searching locally for a high beam, probably hard to find, even at a wrecker.
> > Or as advertised, have it shipped from Van Cafe to your front door in 7-10 days ... say around $100 incl. shipping, maybe less.
> > Any that look fogged up, just poke a stick with a rag on it inside and work it around. They clean up good.
> > Cheers.
> > Ken
> >
> >
> >
> > ________________________________
> > To: Syncro_T3_Australia@yahoogroups.com
> > From: energysustained@
> > Date: Thu, 3 May 2012 00:48:52 -0700
> > Subject: Re: [Syncro_T3_Australia] Square high beam
> >
> > ÂÂ
> >
> >
> > Hi Ken,
> >
> > The situation is as follows:
> > Have (had) 2 SYNCROs
> > Pop Top has just been sold roadworthy-- all good.
> > The other('permanent high top' done by Trakka 20 years ago) needs roadworthy in the near future: eg.broken light- rusty door step - and many other things
> > Rang Burwin Motors in Melbourne for new lens - not available
> > Spare parts gave me the Ph. No for Volkswerke in Melb - they quoted $100 for second hand.:-(
> > Have not ordered from anyone yet.
> > I look forward to getting the high top going again
> > Cheers
> > Tom
> >
> >
> > ________________________________
> > From: Ken Garratt <unclekenz@>
> > To: _T3_Australia forum Syncro <syncro_t3_australia@yahoogroups.com>
> > Sent: Thursday, 3 May 2012 12:39 PM
> > Subject: RE: [Syncro_T3_Australia] Square high beam
> >
> >
> > ÂÂ
> > Tom,
> > May I repeat what I advised you earlier, as below.  Please advise me your findings.
> >
> > "high beams comprise a left and right hand pair."
> >
> > Cheers.
> > Ken
> >
> >
> >
> >
> > ________________________________
> > To: syncro_t3_australia@yahoogroups.com
> > From: unclekenz@
> > Date: Wed, 2 May 2012 15:16:55 +1000
> > Subject: RE: [Syncro_T3_Australia] Square high beam
> >
> > ÂÂ
> >
> >
> > Tom,
> > Can you simply repair it with super glue?
> >
> > Try your local dealer and report back here your success/failure and pricing please. Could be novel.
> >
> > Otherwise, high beams comprise a left and right hand pair.
> > Double check for the part number on the back of the cracked one. Just go by the part number, not where its placed, given USA is LHD.
> > So part no. 533 941 061 - http://www.van-cafe.com/home/van_1223689737929/page_408_1053/left_hi-beam_housing.html
> > Or part no. 533 941 062 - http://www.van-cafe.com/home/van_1223689737929/page_266_1053/right_hi-beam_housing.html
> >
> > Cheers.
> > Ken
> >
> >
> >
> > ________________________________
> > To: Syncro_T3_Australia@yahoogroups.com
> > From: energysustained@
> > Date: Tue, 1 May 2012 18:31:57 -0700
> > Subject: [Syncro_T3_Australia] Square high beam
> >
> > ÂÂ
> >
> >
> > Hi all,ÂÂ
> >
> > One of my square high beam lights has a crack.
> > Does anyone know where to get one from?
> >
> > Thanks
> >
> > TomÂÂ
> >
>