Stock 14' - 4.86 RnP sets (front and rear)

Hello all - any one got 4.86 front and rear RnP avaliable.
I'm planning a drive line rebuild and motor change and looking at bringing down rpm.

Hamish

Sent from my iPhone
That will be a hard task,finding that set.Try Ron at Racetrans in Kempsey,he could maybe source them.Someone here may be able to help with a contact number,I have misplaced the number right now.
BenC

--- In Syncro_T3_Australia@yahoogroups.com, Hamish Dobson <dobson_hamish@...> wrote:
>
> Hello all - any one got 4.86 front and rear RnP avaliable.
> I'm planning a drive line rebuild and motor change and looking at bringing down rpm.
>
> Hamish
>
> Sent from my iPhone
>
I don't think that the 4.86 was ever sold in Australia.

I think that the only boxes sold here were the 6P and 6PA.

The 4.86 is from a AAK or AAN box which I think was common in the US.

Albins make them for the US market so they should be available direct.

Have you thought about keeping the 5.43 and just getting a taller 3rd & 4th?

Phill



----- Original Message -----
From:
Syncro_T3_Australia@yahoogroups.com

To:
<Syncro_T3_Australia@yahoogroups.com>
Cc:

Sent:
Fri, 01 Mar 2013 20:52:56 -0000
Subject:
[Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)


That will be a hard task,finding that set.Try Ron at Racetrans in Kempsey,he could maybe source them.Someone here may be able to help with a contact number,I have misplaced the number right now.
BenC

--- In Syncro_T3_Australia@yahoogroups.com, Hamish Dobson wrote:
>
> Hello all - any one got 4.86 front and rear RnP avaliable.
> I'm planning a drive line rebuild and motor change and looking at bringing down rpm.
>
> Hamish
>
> Sent from my iPhone
>


Email sent using Optus Webmail
If you want to save some (or A LOT of) money you might be able to get a good used set out of the States as they got 4.86 as standard. Greg

From: Ben <bencroft96@yahoo.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Saturday, 2 March 2013 7:52 AM
Subject: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)
 
That will be a hard task,finding that set.Try Ron at Racetrans in Kempsey,he could maybe source them.Someone here may be able to help with a contact number,I have misplaced the number right now.
BenC

--- In mailto:Syncro_T3_Australia%40yahoogroups.com, Hamish Dobson wrote:
>
> Hello all - any one got 4.86 front and rear RnP avaliable.
> I'm planning a drive line rebuild and motor change and looking at bringing down rpm.
>
> Hamish
>
> Sent from my iPhone
>

Good idea Phill. The serious off roaders in the states are swapping to 5.43. R&p's are expensive and if yours are in good nick you should keep them in my opinion. On top of that your third and forth are probably well worn. Greg

From: "plander@optusnet.com.au" <plander@optusnet.com.au>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Saturday, 2 March 2013 8:17 AM
Subject: Re: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)
 
I don't think that the 4.86 was ever sold in Australia.

I think that the only boxes sold here were the 6P and 6PA.

The 4.86 is from a AAK or AAN box which I think was common in the US.

Albins make them for the US market so they should be available direct.

Have you thought about keeping the 5.43 and just getting a taller 3rd & 4th?

Phill



----- Original Message -----
From:
Syncro_T3_Australia@yahoogroups.com

To:
<Syncro_T3_Australia@yahoogroups.com>
Cc:

Sent:
Fri, 01 Mar 2013 20:52:56 -0000
Subject:
[Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)


 
That will be a hard task,finding that set.Try Ron at Racetrans in Kempsey,he could maybe source them.Someone here may be able to help with a contact number,I have misplaced the number right now.
BenC

--- In mailto:Syncro_T3_Australia%40yahoogroups.com, Hamish Dobson wrote:
>
> Hello all - any one got 4.86 front and rear RnP avaliable.
> I'm planning a drive line rebuild and motor change and looking at bringing down rpm.
>
> Hamish
>
> Sent from my iPhone
>

Email sent using Optus Webmail
Hi phill have I made a mistake?

I am referring to the stock 2.1 ltr RnP that I had in my ex Telstra van.

My current ones are 6.17 and already I have a 0.78 forth(was 0.85).

Hjd.

Sent from my iPhone

On 02/03/2013, at 7:17 AM, plander@optusnet.com.au wrote:

I don't think that the 4.86 was ever sold in Australia.

I think that the only boxes sold here were the 6P and 6PA.

The 4.86 is from a AAK or AAN box which I think was common in the US.

Albins make them for the US market so they should be available direct.

Have you thought about keeping the 5.43 and just getting a taller 3rd & 4th?

Phill



----- Original Message -----

To:
<Syncro_T3_Australia@yahoogroups.com>
Cc:

Sent:
Fri, 01 Mar 2013 20:52:56 -0000
Subject:
[Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)


 

That will be a hard task,finding that set.Try Ron at Racetrans in Kempsey,he could maybe source them.Someone here may be able to help with a contact number,I have misplaced the number right now.
BenC

--- In Syncro_T3_Australia@yahoogroups.com, Hamish Dobson wrote:
>
> Hello all - any one got 4.86 front and rear RnP avaliable.
> I'm planning a drive line rebuild and motor change and looking at bringing down rpm.
>
> Hamish
>
> Sent from my iPhone
>


Email sent using Optus Webmail
Thats 5.43. Where did you get the 6.17?

From: Hamish Dobson <dobson_hamish@yahoo.com.au>
To: "Syncro_T3_Australia@yahoogroups.com" <Syncro_T3_Australia@yahoogroups.com>
Sent: Saturday, 2 March 2013 8:50 AM
Subject: Re: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)
 
Hi phill have I made a mistake?

I am referring to the stock 2.1 ltr RnP that I had in my ex Telstra van.

My current ones are 6.17 and already I have a 0.78 forth(was 0.85).

Hjd.

Sent from my iPhone
On 02/03/2013, at 7:17 AM, plander@optusnet.com.au wrote:
I don't think that the 4.86 was ever sold in Australia. I think that the only boxes sold here were the 6P and 6PA. The 4.86 is from a AAK or AAN box which I think was common in the US. Albins make them for the US market so they should be available direct. Have you thought about keeping the 5.43 and just getting a taller 3rd & 4th? Phill

----- Original Message -----

To:
<Syncro_T3_Australia@yahoogroups.com>
Cc:

Sent:
Fri, 01 Mar 2013 20:52:56 -0000
Subject:
[Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)


 
That will be a hard task,finding that set.Try Ron at Racetrans in Kempsey,he could maybe source them.Someone here may be able to help with a contact number,I have misplaced the number right now.
BenC

--- In mailto:Syncro_T3_Australia%40yahoogroups.com, Hamish Dobson wrote:
>
> Hello all - any one got 4.86 front and rear RnP avaliable.
> I'm planning a drive line rebuild and motor change and looking at bringing down rpm.
>
> Hamish
>
> Sent from my iPhone
>

Email sent using Optus Webmail
RUDI on bribie.



From: greg esposito <gregespo73@yahoo.com>
To: "Syncro_T3_Australia@yahoogroups.com" <Syncro_T3_Australia@yahoogroups.com>
Sent: Saturday, 2 March 2013 8:40 AM
Subject: Re: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)



Thats 5.43. Where did you get the 6.17?

From: Hamish Dobson <dobson_hamish@yahoo.com.au>
To: "Syncro_T3_Australia@yahoogroups.com" <Syncro_T3_Australia@yahoogroups.com>
Sent: Saturday, 2 March 2013 8:50 AM
Subject: Re: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)
 
Hi phill have I made a mistake?

I am referring to the stock 2.1 ltr RnP that I had in my ex Telstra van.

My current ones are 6.17 and already I have a 0.78 forth(was 0.85).

Hjd.

Sent from my iPhone
On 02/03/2013, at 7:17 AM, plander@optusnet.com.au wrote:
I don't think that the 4.86 was ever sold in Australia. I think that the only boxes sold here were the 6P and 6PA. The 4.86 is from a AAK or AAN box which I think was common in the US. Albins make them for the US market so they should be available direct. Have you thought about keeping the 5.43 and just getting a taller 3rd & 4th? Phill

----- Original Message -----

To:
<Syncro_T3_Australia@yahoogroups.com>
Cc:

Sent:
Fri, 01 Mar 2013 20:52:56 -0000
Subject:
[Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)


 
That will be a hard task,finding that set.Try Ron at Racetrans in Kempsey,he could maybe source them.Someone here may be able to help with a contact number,I have misplaced the number right now.
BenC

--- In mailto:Syncro_T3_Australia%40yahoogroups.com, Hamish Dobson wrote:
>
> Hello all - any one got 4.86 front and rear RnP avaliable.
> I'm planning a drive line rebuild and motor change and looking at bringing down rpm.
>
> Hamish
>
> Sent from my iPhone
>

Email sent using Optus Webmail




That’s the standard 16” gearing

Les


From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of greg esposito
Sent: 02 March 2013 09:41
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)

Thats 5.43. Where did you get the 6.17?

 

I converted my syncro to a 16" running 205 70 r16
the gearing was req for the 2.1 engine
i then installed a 2.4 stroker kit.
i then converted to a west falia poptop camper
now installing vr6

From: Les Harris <leslieharris@optusnet.com.au>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Saturday, 2 March 2013 8:56 AM
Subject: RE: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)



That’s the standard 16” gearing
Les
From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of greg esposito
Sent: 02 March 2013 09:41
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: [Syncro_T3_Australia] Re: Stock 14' - 4.86 RnP sets (front and rear)
Thats 5.43. Where did you get the 6.17?