2.1 wbx weight???

Anyone know how much a complete Syncro motor and exhaust would weigh?
BenC
Any estimates?

--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@...> wrote:
>
> Anyone know how much a complete Syncro motor and exhaust would weigh?
> BenC
>
ok,
285 lbs.
I'm sure it's on the internet somewhere.
----- Original Message -----
From: Ben
Sent: Thursday, May 19, 2011 2:56 PM
Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Any estimates?

--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@...> wrote:
>
> Anyone know how much a complete Syncro motor and exhaust would weigh?
> BenC
>

Hey Ben

HAve you sold that 2.1 yet?
Where are you based.
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans <ScottDaniel@turbovans.com> wrote:

ok,
285 lbs.
I'm sure it's on the internet somewhere.
----- Original Message -----
From: Ben
Sent: Thursday, May 19, 2011 2:56 PM
Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???

Any estimates?

--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@...> wrote:
>
> Anyone know how much a complete Syncro motor and exhaust would weigh?
> BenC
>


Paul,yes I have sold the motor.
--- In Syncro_T3_Australia@yahoogroups.com, Paul Dumais <paul.d.dumais@...> wrote:
>
> Hey Ben
>
> HAve you sold that 2.1 yet?
> Where are you based.
> Cheers
> Paul Dumais
> Byron Bay
>
> On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans <
> ScottDaniel@...> wrote:
>
> >
> >
> > ok,
> > 285 lbs.
> > I'm sure it's on the internet somewhere.
> >
> > ----- Original Message -----
> > *From:* Ben <bencroft96@...>
> > *To:* Syncro_T3_Australia@yahoogroups.com
> > *Sent:* Thursday, May 19, 2011 2:56 PM
> > *Subject:* [Syncro_T3_Australia] Re: 2.1 wbx weight???
> >
> >
> >
> > Any estimates?
> >
> > --- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@> wrote:
> > >
> > > Anyone know how much a complete Syncro motor and exhaust would weigh?
> > > BenC
> > >
> >
> >
> >
>



From: Paul Dumais <paul.d.dumais@gmail.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Fri, 20 May, 2011 3:15:30 PM
Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Hey Ben


HAve you sold that 2.1 yet?
Where are you based.
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans <ScottDaniel@turbovans.com> wrote:
 

ok,
285 lbs.
I'm sure it's on the internet somewhere.
----- Original Message -----
From: Ben
Sent: Thursday, May 19, 2011 2:56 PM
Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Any estimates?

--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@...> wrote:
>
> Anyone know how much a complete Syncro motor and exhaust would weigh?
> BenC
>


Hi Paul,

Are you looking to buy a 2.1 motor.I have one that i bought last year to do up however since i sold my Syncro i will not be doing it up.If interested let me know as you can have it for $400.00.

Cheers,

Everard

Sounds great, where are you based Everard.
What condition is it in?
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 5:50 PM, Everard Hoffman <everardhoffman@yahoo.com> wrote:




From: Paul Dumais <paul.d.dumais@gmail.com>Sent: Fri, 20 May, 2011 3:15:30 PM
Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

Hey Ben


HAve you sold that 2.1 yet?
Where are you based.
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans <ScottDaniel@turbovans.com> wrote:

ok,
285 lbs.
I'm sure it's on the internet somewhere.
----- Original Message -----
From: Ben
Sent: Thursday, May 19, 2011 2:56 PM
Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???

Any estimates?

--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@...> wrote:
>
> Anyone know how much a complete Syncro motor and exhaust would weigh?
> BenC
>


Hi Paul,

Are you looking to buy a 2.1 motor.I have one that i bought last year to do up however since i sold my Syncro i will not be doing it up.If interested let me know as you can have it for $400.00.

Cheers,

Everard


Hi Paul,
I am located in Melbourne (Croydon).The motor is complete bar the distributor.It can be turned over by hand
My intention was to fully rebuild it therefore i bought 2 New Heads for it which i still have.Obviously they are not included but can be bought seperately.The Motor is till sitting on the pallet it came on when i got it in 2010 february.It has been kept covered so no dampness gets in.As mentioned earlier i sold my Syncro in November last year therefore i have no need for the motor anymore which is why i am offering it for sale.Cheers,Everard 


From: Paul Dumais <paul.d.dumais@gmail.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Fri, 20 May, 2011 6:52:21 PM
Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Sounds great, where are you based Everard.
What condition is it in?
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 5:50 PM, Everard Hoffman <everardhoffman@yahoo.com> wrote:
 




From: Paul Dumais <paul.d.dumais@gmail.com> Sent: Fri, 20 May, 2011 3:15:30 PM
Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Hey Ben


HAve you sold that 2.1 yet?
Where are you based.
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans <ScottDaniel@turbovans.com> wrote:
 

ok,
285 lbs.
I'm sure it's on the internet somewhere.
----- Original Message -----
From: Ben
Sent: Thursday, May 19, 2011 2:56 PM
Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Any estimates?

--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@...> wrote:
>
> Anyone know how much a complete Syncro motor and exhaust would weigh?
> BenC
>


Hi Paul,

Are you looking to buy a 2.1 motor.I have one that i bought last year to do up however since i sold my Syncro i will not be doing it up.If interested let me know as you can have it for $400.00.

Cheers,

Everard



be careful about turning a waterboxer engine over without a distributor installed in it.
 
it's 'probably ok' ..
but if that distributor drive shaft slides  up and allows two washers on the bottom of it to tilt or get out of place..
they can jam on the drive gear on the crankshaft..
-   a real mess if that ever happens.
At least rig something.........like a heavy wire bent to fit ..
to stick down into the dist hole and hold the dist shaft down in place.. ( and held in place under the distributor mounting nut ) ..
then it's safe to turn the engine over by hand now and then, which is very important to do on a stored engine.
 
 
----- Original Message -----
Sent: Friday, May 20, 2011 2:43 PM
Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Hi Paul,
I am located in Melbourne (Croydon).The motor is complete bar the distributor.It can be turned over by hand
My intention was to fully rebuild it therefore i bought 2 New Heads for it which i still have.Obviously they are not included but can be bought seperately.The Motor is till sitting on the pallet it came on when i got it in 2010 february.It has been kept covered so no dampness gets in.As mentioned earlier i sold my Syncro in November last year therefore i have no need for the motor anymore which is why i am offering it for sale.Cheers,Everard 


From: Paul Dumais <paul.d.dumais@gmail.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Fri, 20 May, 2011 6:52:21 PM
Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Sounds great, where are you based Everard.
What condition is it in?
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 5:50 PM, Everard Hoffman <everardhoffman@yahoo.com> wrote:
 




From: Paul Dumais <paul.d.dumais@gmail.com> Sent: Fri, 20 May, 2011 3:15:30 PM
Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Hey Ben


HAve you sold that 2.1 yet?
Where are you based.
Cheers
Paul Dumais
Byron Bay

On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans <ScottDaniel@turbovans.com> wrote:
 

ok,
285 lbs.
I'm sure it's on the internet somewhere.
----- Original Message -----
From: Ben
Sent: Thursday, May 19, 2011 2:56 PM
Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Any estimates?

--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@...> wrote:
>
> Anyone know how much a complete Syncro motor and exhaust would weigh?
> BenC
>


Hi Paul,

Are you looking to buy a 2.1 motor.I have one that i bought last year to do up however since i sold my Syncro i will not be doing it up.If interested let me know as you can have it for $400.00.

Cheers,

Everard


Everard,

Is your engine still for sale? Do you have a contact telephone number?

I've just sold an engine, but a guy who missed out on mine is desperate to get an engine.

craig


--- In Syncro_T3_Australia@yahoogroups.com, Everard Hoffman <everardhoffman@...> wrote:
>
> Hi Paul,
> I am located in Melbourne (Croydon).The motor is complete bar the distributor.It
> can be turned over by hand
> My intention was to fully rebuild it therefore i bought 2 New Heads for it which
> i still have.Obviously they are not included but can be bought seperately.The
> Motor is till sitting on the pallet it came on when i got it in 2010 february.It
> has been kept covered so no dampness gets in.As mentioned earlier i sold my
> Syncro in November last year therefore i have no need for the motor anymore
> which is why i am offering it for sale.Cheers,EverardÂ
>
>
>
> ________________________________
> From: Paul Dumais <paul.d.dumais@...>
> To: Syncro_T3_Australia@yahoogroups.com
> Sent: Fri, 20 May, 2011 6:52:21 PM
> Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???
>
> Â
> Sounds great, where are you based Everard.
> What condition is it in?
> Cheers
> Paul Dumais
> Byron Bay
>
>
> On Fri, May 20, 2011 at 5:50 PM, Everard Hoffman <everardhoffman@...>
> wrote:
>
> Â
> >
> >
> >
> >
> >
> ________________________________
> From: Paul Dumais <paul.d.dumais@...>
> >
> >To: Syncro_T3_Australia@yahoogroups.com
> >Sent: Fri, 20 May, 2011 3:15:30 PM
> >Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???
> >
> >
> >Â
> >Hey Ben
> >
> >
> >HAve you sold that 2.1 yet?
> >Where are you based.
> >Cheers
> >Paul Dumais
> >Byron Bay
> >
> >
> >On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans
> ><ScottDaniel@...> wrote:
> >
> >Â
> >>ok,
> >>285 lbs.
> >>I'm sure it's on the internet somewhere.
> >>----- Original Message -----
> >>>From: Ben
> >>>To: Syncro_T3_Australia@yahoogroups.com
> >>>Sent: Thursday, May 19, 2011 2:56 PM
> >>>Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???
> >>>
> >>>Â
> >>>Any estimates?
> >>>
> >>>--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@> wrote:
> >>>>
> >>>> Anyone know how much a complete Syncro motor and exhaust would weigh?
> >>>> BenC
> >>>>
> >>>
> >>>
> >
> >Hi Paul,
> >Are you looking to buy a 2.1 motor.I have one that i bought last year to do up
> >however since i sold my Syncro i will not be doing it up.If interested let me
> >know as you can have it for $400.00.
> >Cheers,
> >Everard
>
Hi Craig,
Sorry Mate Paul picked up the motor yesterday.If i hear of anyone who is selling one i will let you know.All the best.
Cheers,
Everard


From: Craig <craig.clayton@fastjv.com.au>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Tue, 24 May, 2011 2:54:08 PM
Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 

Everard,

Is your engine still for sale? Do you have a contact telephone number?

I've just sold an engine, but a guy who missed out on mine is desperate to get an engine.

craig

--- In Syncro_T3_Australia@yahoogroups.com, Everard Hoffman <everardhoffman@...> wrote:
>
> Hi Paul,
> I am located in Melbourne (Croydon).The motor is complete bar the distributor.It
> can be turned over by hand
> My intention was to fully rebuild it therefore i bought 2 New Heads for it which
> i still have.Obviously they are not included but can be bought seperately.The
> Motor is till sitting on the pallet it came on when i got it in 2010 february.It
> has been kept covered so no dampness gets in.As mentioned earlier i sold my
> Syncro in November last year therefore i have no need for the motor anymore
> which is why i am offering it for sale.Cheers,Everard 
>
>
>
> ________________________________
> From: Paul Dumais <paul.d.dumais@...>
> To: Syncro_T3_Australia@yahoogroups.com
> Sent: Fri, 20 May, 2011 6:52:21 PM
> Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???
>
>  
> Sounds great, where are you based Everard.
> What condition is it in?
> Cheers
> Paul Dumais
> Byron Bay
>
>
> On Fri, May 20, 2011 at 5:50 PM, Everard Hoffman <everardhoffman@...>
> wrote:
>
>  
> >
> >
> >
> >
> >
> ________________________________
> From: Paul Dumais <paul.d.dumais@...>
> >
> >To: Syncro_T3_Australia@yahoogroups.com
> >Sent: Fri, 20 May, 2011 3:15:30 PM
> >Subject: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???
> >
> >
> > 
> >Hey Ben
> >
> >
> >HAve you sold that 2.1 yet?
> >Where are you based.
> >Cheers
> >Paul Dumais
> >Byron Bay
> >
> >
> >On Fri, May 20, 2011 at 8:54 AM, Scott Daniel - Turbovans
> ><ScottDaniel@...> wrote:
> >
> > 
> >>ok,
> >>285 lbs.
> >>I'm sure it's on the internet somewhere.
> >>----- Original Message -----
> >>>From: Ben
> >>>To: Syncro_T3_Australia@yahoogroups.com
> >>>Sent: Thursday, May 19, 2011 2:56 PM
> >>>Subject: [Syncro_T3_Australia] Re: 2.1 wbx weight???
> >>>
> >>> 
> >>>Any estimates?
> >>>
> >>>--- In Syncro_T3_Australia@yahoogroups.com, "Ben" <bencroft96@> wrote:
> >>>>
> >>>> Anyone know how much a complete Syncro motor and exhaust would weigh?
> >>>> BenC
> >>>>
> >>>
> >>>
> >
> >Hi Paul,
> >Are you looking to buy a 2.1 motor.I have one that i bought last year to do up
> >however since i sold my Syncro i will not be doing it up.If interested let me
> >know as you can have it for $400.00.
> >Cheers,
> >Everard
>

Hi All,

I got that motor from Everade running, with the dizzy from my other syncro.
It's a bit noisy, but nothing a good run wouldn't sort out.
Does anyone have a spare dizzy they could part with so I can get her on the road?

Cheers
Paul
Try here,

http://forums.kombiclub.com/showthread.php?t=37544

I don't know if it's a 1,9 or a 2,1.

Phill



> Paul Dumais <paul.d.dumais@gmail.com> wrote:
>
> Hi All,
>
> I got that motor from Everade running, with the dizzy from my other
> syncro.
> It's a bit noisy, but nothing a good run wouldn't sort out.
> Does anyone have a spare dizzy they could part with so I can get her on
> the
> road?
>
> Cheers
> Paul
That water pump is 1.9.

From: "plander@optusnet.com.au" <plander@optusnet.com.au>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Thursday, 27 October 2011 12:45 PM
Subject: Re: Re: [Syncro_T3_Australia] Re: 2.1 wbx weight???

 
Try here,

http://forums.kombiclub.com/showthread.php?t=37544

I don't know if it's a 1,9 or a 2,1.

Phill

> Paul Dumais <paul.d.dumais@gmail.com> wrote:
>
> Hi All,
>
> I got that motor from Everade running, with the dizzy from my other
> syncro.
> It's a bit noisy, but nothing a good run wouldn't sort out.
> Does anyone have a spare dizzy they could part with so I can get her on
> the
> road?
>
> Cheers
> Paul