Alloy water tank on ebay ( take 2)

1
Hi,

I have just listed an alloy water tank which is surplus to my
requirements, it was removed from a '89 Syncro with a Trakka conversion.
Seems very well made and in good cond. custom made to suit the T3.

thanks,

Steve

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=330208391519
2
While we are on the Ebay subject, I have a few T3 parts listed as well.
 
Dave
 
 
----- Original Message -----
From: Steve
Sent: Wednesday, January 30, 2008 8:30 PM
Subject: [Syncro_T3_Australia] Alloy water tank on ebay ( take 2)

Hi,

I have just listed an alloy water tank which is surplus to my
requirements, it was removed from a '89 Syncro with a Trakka conversion.
Seems very well made and in good cond. custom made to suit the T3.

thanks,

Steve

http://cgi.ebay. com.au/ws/ eBayISAPI. dll?ViewItem& item=33020839151 9

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.16/1250 - Release Date: 1/29/2008 10:20 PM
3
On 1/30/08, Steve <stevejacobson@netspace.net.au> wrote:
Hi,

I have just listed an alloy water tank which is surplus to my
requirements, it was removed from a '89 Syncro with a Trakka conversion.
Seems very well made and in good cond. custom made to suit the T3.

thanks,

Steve

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=330208391519
 
Hi Steve,
 
Any chance on shipping to US?
 
BenT
4
> Hi Steve,
>
> Any chance on shipping to US?
>
> BenT
>


Hi Ben,

sure, I can organize shipping if needed.

Steve.
5
Hi Steve

as it's assymetric I assume it is for one side only - the left I assume when looking rear to front?

Regards
Mark

On Jan 30, 2008 8:30 PM, Steve <stevejacobson@netspace.net.au> wrote:

Hi,

I have just listed an alloy water tank which is surplus to my
requirements, it was removed from a '89 Syncro with a Trakka conversion.
Seems very well made and in good cond. custom made to suit the T3.

thanks,

Steve

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=330208391519




--
Regards
Mark


Mark Kofahl
Solutions Outsourced Pty Ltd
Main: 1300 33 1000
Direct: 02 9375 2747
Mobile: 0419 275 259




16 View Street, Camden, NSW, 2570
PO Box 658, Camden, NSW, 2570

www.solutionsoutsourced.com.au


=======================================
This e-mail, including all attachments, may be confidential or privileged. Confidentiality or privilege is not waived or lost because this email has been sent to you in error. If you are not the intended recipient, any use, disclosure or copying of this email is prohibited. If you have received it in error please notify the sender immediately by reply email and destroy all copies of this email and any attachments. All liability for direct and indirect loss arising from this email and any attachments is hereby disclaimed to the extent permitted by law. Any views or opinions presented are solely those of the author and do not necessarily represent those of Solutions Outsourced Pty Ltd.

6
--- In Syncro_T3_Australia@yahoogroups.com, "Mark Kofahl"
<markkofahl@...> wrote:
>
> Hi Steve
>
> as it's assymetric I assume it is for one side only - the left I
assume when
> looking rear to front?
>
> Regards
> Mark
>

Hi Mark,

it fits on the right hand side ( drivers side in Aus.), the squre-ish
plate is a mount for a electric pump and to protect the outlet , that
is on the bottom edge. hope that makes sense.

Steve
7
Thanks Steve - I am near Sydney (camden - a little like Yarra Junction - about an hour out of the city).

Has me thinking - as I already have a water tank on my conversion (not Trakka) and it is on passenger side as opposed to driver's side. A second tank could be used for a number of purposes (hot water, waste water, more capacity perhaps)

Any estimates to get it to NSW?

Brian - if you reading, I believe you had a hot water system using heat exchange? Was that documented anywhere?

Regards
Mark.


Hi Mark,

it fits on the right hand side ( drivers side in Aus.), the squre-ish
plate is a mount for a electric pump and to protect the outlet , that
is on the bottom edge. hope that makes sense.

Steve


8
Hi Mark,

I'll look into shipping cost tomorrow and let you know how much.

Steve.
9
Mark,
 
This is the standard Trakka tank, same as on mine and several other member's Syncros.
 
Les
 
----- Original Message -----
Sent: Wednesday, January 30, 2008 9:20 PM
Subject: Re: [Syncro_T3_Australia] Re: Alloy water tank on ebay ( take 2)

Thanks Steve - I am near Sydney (camden - a little like Yarra Junction - about an hour out of the city).

Has me thinking - as I already have a water tank on my conversion (not Trakka) and it is on passenger side as opposed to driver's side. A second tank could be used for a number of purposes (hot water, waste water, more capacity perhaps)

Any estimates to get it to NSW?

Brian - if you reading, I believe you had a hot water system using heat exchange? Was that documented anywhere?

Regards
Mark.



Hi Mark,

it fits on the right hand side ( drivers side in Aus.), the squre-ish
plate is a mount for a electric pump and to protect the outlet , that
is on the bottom edge. hope that makes sense.

Steve


10
--- In Syncro_T3_Australia@yahoogroups.com, "Les Harris"
<leslieharris@...> wrote:
>
> Mark,
>
> This is the standard Trakka tank, same as on mine and several other
member's Syncros.
>
> Les
>





Thanks Les,

I thought it was the standard Trakka tank, but wasn't sure.

Steve
11

Hi Mark,

 

Yes I did design a hot water system for my T3, and a wrote up a description of it. I thought I’d posted it here, and I know I posted it on the KombiClub forums, but now I can’t find it. I also think I sent it to Steve, who bought my van, so if he still has it maybe he can post it here.

 

Put simply though, you need a water tank which can withstand some pressure (when the water heats, it can potentially boil), and you just fit it with a single loop of standard ½ inch copper pipe, plumbed in to the heater circuit.

 

BRIAN REED

FAIRFIELD NATURAL THERAPIES

185 Wingrove St

Fairfield, Vic. 3078

03 9481 5673   0407 319 521

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of Mark Kofahl
Sent: Wednesday, 30 January 2008 9:21 PM
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: [Syncro_T3_Australia] Re: Alloy water tank on ebay ( take 2)

 

Thanks Steve - I am near Sydney ( camden - a little like Yarra Junction - about an hour out of the city).

Has me thinking - as I already have a water tank on my conversion (not Trakka) and it is on passenger side as opposed to driver's side. A second tank could be used for a number of purposes (hot water, waste water, more capacity perhaps)

Any estimates to get it to NSW?

Brian - if you reading, I believe you had a hot water system using heat exchange? Was that documented anywhere?

Regards
Mark.

 

Hi Mark,

it fits on the right hand side ( drivers side in Aus.), the squre-ish
plate is a mount for a electric pump and to protect the outlet , that
is on the bottom edge. hope that makes sense.

Steve