Cv Joint

Is the rear cv joint the same in a syncro as a 2wd T3 Transporter. Can either be used. Just lately an intermittent clicking sound has started when engine under load accelerating. OK, nothing heard when turning tight corners or u turning. Have recently replaced the wheel bearing in that same wheel so it's not that.
same part

From: Michael <mallaner@gmail.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Thursday, 4 August 2011 3:09 PM
Subject: [Syncro_T3_Australia] Cv Joint

 
Is the rear cv joint the same in a syncro as a 2wd T3 Transporter. Can either be used. Just lately an intermittent clicking sound has started when engine under load accelerating. OK, nothing heard when turning tight corners or u turning. Have recently replaced the wheel bearing in that same wheel so it's not that.



someone told me that the cv from later T2 could be used either. True?

Sent from Boon's iPad2

On 4 ส.ค. 2554, at 14:07, greg esposito <gregespo73@yahoo.com> wrote:

 

same part

From: Michael <mallaner@gmail.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Thursday, 4 August 2011 3:09 PM
Subject: [Syncro_T3_Australia] Cv Joint

 
Is the rear cv joint the same in a syncro as a 2wd T3 Transporter. Can either be used. Just lately an intermittent clicking sound has started when engine under load accelerating. OK, nothing heard when turning tight corners or u turning. Have recently replaced the wheel bearing in that same wheel so it's not that.



yes late bay window from '68

From: Hanniboon <hanniboon@yahoo.com>
To: "Syncro_T3_Australia@yahoogroups.com" <Syncro_T3_Australia@yahoogroups.com>
Sent: Thursday, 4 August 2011 8:11 PM
Subject: Re: [Syncro_T3_Australia] Cv Joint

 
someone told me that the cv from later T2 could be used either. True?

Sent from Boon's iPad2

On 4 ส.ค. 2554, at 14:07, greg esposito <gregespo73@yahoo.com> wrote:

 
same part

From: Michael <mallaner@gmail.com>
To: Syncro_T3_Australia@yahoogroups.com
Sent: Thursday, 4 August 2011 3:09 PM
Subject: [Syncro_T3_Australia] Cv Joint

 
Is the rear cv joint the same in a syncro as a 2wd T3 Transporter. Can either be used. Just lately an intermittent clicking sound has started when engine under load accelerating. OK, nothing heard when turning tight corners or u turning. Have recently replaced the wheel bearing in that same wheel so it's not that.