Fw: RE: [Syncro_T3_Australia] Coolant Pipes and vanilla slices

1
Trying yet again but deleting 2 Ronnies link which will send separately. Its appearing in my sent box.
Roger

--- On Mon, 26/7/10, Roger Bell <bellrmit@yahoo.com.au> wrote:

From: Roger Bell <bellrmit@yahoo.com.au>
Subject: Fw: RE: [Syncro_T3_Australia] Coolant Pipes and vanilla slices
To: "Syncro Aust Group" <syncro_t3_australia@yahoogroups.com>
Received: Monday, 26 July, 2010, 5:08 PM

Sent this earlier today but apparently didn't go through. Trying again.
Roger

--- On Mon, 26/7/10, Roger Bell <bellrmit@yahoo.com.au> wrote:

From: Roger Bell <bellrmit@yahoo.com.au>
Subject: RE: [Syncro_T3_Australia] Coolant Pipes and vanilla slices
To: Syncro_T3_Australia@yahoogroups.com
Received: Monday, 26 July, 2010, 1:08 PM

Dear Ken,Theo,
Just put phone down from Gates who confirmed Theo's source of Repco being one of their major retailers and advised we would need to contact them as they do not quote prices to the public.(So thanks Theo) 
They also confirmed that the wire inserted coolant hose was the only one of larger diameter that came in 10' lengths.(Nothing longer) Its part number is 28320 if you want to check at your local Repco retailer.
The NON wire inserted greenline coolant hose part number is 24220 but comes in a max of 3' (0.91metre) lengths. They do not offer any joiners only reducers which is the opposite of what we want.  They suggested joining with exhaust pipe and clamps. On sizes they do not catalogue the o/d but thought 32mm i/d would equate to their 1.25".
 
Suggest before proceeding you watch the 2 Ronnies sketch "Any 'ose?"
 
 
 
Roger
--- On Mon, 26/7/10, Theo Weiss <teows@melbpc.org.au> wrote:

From: Theo Weiss <teows@melbpc.org.au>
Subject: RE: [Syncro_T3_Australia] Coolant Pipes and vanilla slices
To: Syncro_T3_Australia@yahoogroups.com
Received: Monday, 26 July, 2010, 11:59 AM

 
Ken,
I checked with the local Repco shop ( Gates suppliers).
The Wire-Inserted Green Stripe Coolant Hose 1.5"I.D. $255.00 !! per 10 foot
Cheers
Theo


 

 

 
2
2 Ronnies Link.     http://www.youtube.com/watch?v=Cz2-ukrd2VQ

--- On Mon, 26/7/10, Roger Bell <bellrmit@yahoo.com.au> wrote:

From: Roger Bell <bellrmit@yahoo.com.au>
Subject: Fw: RE: [Syncro_T3_Australia] Coolant Pipes and vanilla slices
To: syncro_t3_australia@yahoogroups.com
Received: Monday, 26 July, 2010, 5:20 PM

 
Trying yet again but deleting 2 Ronnies link which will send separately. Its appearing in my sent box.
 

 

 
3
Sent this earlier today but apparently didn't go through. Trying again.
Roger

--- On Mon, 26/7/10, Roger Bell <bellrmit@yahoo.com.au> wrote:

From: Roger Bell <bellrmit@yahoo.com.au>
Subject: RE: [Syncro_T3_Australia] Coolant Pipes and vanilla slices
To: Syncro_T3_Australia@yahoogroups.com
Received: Monday, 26 July, 2010, 1:08 PM

Dear Ken,Theo,
Just put phone down from Gates who confirmed Theo's source of Repco being one of their major retailers and advised we would need to contact them as they do not quote prices to the public.(So thanks Theo) 
They also confirmed that the wire inserted coolant hose was the only one of larger diameter that came in 10' lengths.(Nothing longer) Its part number is 28320 if you want to check at your local Repco retailer.
The NON wire inserted greenline coolant hose part number is 24220 but comes in a max of 3' (0.91metre) lengths. They do not offer any joiners only reducers which is the opposite of what we want.  They suggested joining with exhaust pipe and clamps. On sizes they do not catalogue the o/d but thought 32mm i/d would equate to their 1.25".
 
Suggest before proceeding you watch the 2 Ronnies sketch "Any 'ose?"
 
 
Roger
--- On Mon, 26/7/10, Theo Weiss <teows@melbpc.org.au> wrote:

From: Theo Weiss <teows@melbpc.org.au>
Subject: RE: [Syncro_T3_Australia] Coolant Pipes and vanilla slices
To: Syncro_T3_Australia@yahoogroups.com
Received: Monday, 26 July, 2010, 11:59 AM

 
Ken,
I checked with the local Repco shop ( Gates suppliers).
The Wire-Inserted Green Stripe Coolant Hose 1.5"I.D. $255.00 !! per 10 foot
Cheers
Theo


 

 
4
Roger, came through ok
Gary

On 26/07/2010, at 7:08 PM, Roger Bell wrote:

 

Sent this earlier today but apparently didn't go through. Trying again.
Roger

--- On Mon, 26/7/10, Roger Bell <bellrmit@yahoo.com.au> wrote:

From: Roger Bell <bellrmit@yahoo.com.au>
Subject: RE: [Syncro_T3_Australi a] Coolant Pipes and vanilla slices
To: Syncro_T3_Australia @yahoogroups. com
Received: Monday, 26 July, 2010, 1:08 PM

Dear Ken,Theo,
Just put phone down from Gates who confirmed Theo's source of Repco being one of their major retailers and advised we would need to contact them as they do not quote prices to the public.(So thanks Theo) 
They also confirmed that the wire inserted coolant hose was the only one of larger diameter that came in 10' lengths.(Nothing longer) Its part number is 28320 if you want to check at your local Repco retailer.
The NON wire inserted greenline coolant hose part number is 24220 but comes in a max of 3' (0.91metre) lengths. They do not offer any joiners only reducers which is the opposite of what we want.  They suggested joining with exhaust pipe and clamps. On sizes they do not catalogue the o/d but thought 32mm i/d would equate to their 1.25".
 
Suggest before proceeding you watch the 2 Ronnies sketch "Any 'ose?"
 
 
Roger
--- On Mon, 26/7/10, Theo Weiss <teows@melbpc.org.au> wrote:

From: Theo Weiss <teows@melbpc.org.au>
Subject: RE: [Syncro_T3_Australi a] Coolant Pipes and vanilla slices
To: Syncro_T3_Australia @yahoogroups. com
Received: Monday, 26 July, 2010, 11:59 AM

 
Ken,
I checked with the local Repco shop ( Gates suppliers).
The Wire-Inserted Green Stripe Coolant Hose 1.5"I.D. $255.00 !! per 10 foot
Cheers
Theo