Fwd: Micro switch



Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 3:38:02 PM AEDT
To: Hartmut Kiehn <hartis@live.com.au>
Subject: Fwd: Micro switch



Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 2:20:29 PM AEDT
To: Syncro_T3_Australia@yahoo.com
Subject: Micro switch

Hi all,
Got my idle/ full power enrichment micro switch from Yurik and fitted it. Started the engine and the rest was utter disbelief.... It started without moving the metal to the floor and straightway idled at 900 rpm .for years now it was hard to start and when it did, it idled at say 2000rpm than falling back to 1200. I never got it any better. This is all past now.
Thanks to Les and All providing this platform which does make an interaction possible. And getting a spare part within 3 days.... just unbelievable.
But it also shows that one gets used to a condition even a faulty one if confronted by it on a daily basis.
No more rough running , just humming..
Very happy
Hartmut


Sent from my iPad
Brilliant work Hart & Yurik for supplying the micro-switch.

Cheers,

Skot


On 16/10/2014 3:40 PM, Hartmut Kiehn hartis@live.com.au [Syncro_T3_Australia] wrote:


Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 3:38:02 PM AEDT
To: Hartmut Kiehn <hartis@live.com.au>
Subject: Fwd: Micro switch



Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 2:20:29 PM AEDT
To: Syncro_T3_Australia@yahoo.com
Subject: Micro switch

Hi all,
Got my idle/ full power enrichment micro switch from Yurik and fitted it. Started the engine and the rest was utter disbelief.... It started without moving the metal to the floor and straightway idled at 900 rpm .for years now it was hard to start and when it did, it idled at say 2000rpm than falling back to 1200. I never got it any better. This is all past now.
Thanks to Les and All providing this platform which does make an interaction possible. And getting a spare part within 3 days.... just unbelievable.
But it also shows that one gets used to a condition even a faulty one if confronted by it on a daily basis.
No more rough running , just humming..
Very happy
Hartmut


Sent from my iPad

Tnx Skot, the TriStar is a changed vehicle, amazes me . Tomorrow it's off to NZ to see Dave Finnie the next weekend, a long one in NZ and they always enjoying a v dub weekend on their block. Should be interesting to see the vehicles. Will upload pics if Peter of Port shows me how ...!!! m sure he will..

Sent from my iPad

On 16 Oct 2014, at 3:43 pm, "spbconsulting@bigpond.com [Syncro_T3_Australia]" <Syncro_T3_Australia@yahoogroups.com> wrote:

 

Brilliant work Hart & Yurik for supplying the micro-switch.

Cheers,

Skot


On 16/10/2014 3:40 PM, Hartmut Kiehn hartis@live.com.au [Syncro_T3_Australia] wrote:
 


Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 3:38:02 PM AEDT
To: Hartmut Kiehn <hartis@live.com.au>
Subject: Fwd: Micro switch



Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 2:20:29 PM AEDT
To: Syncro_T3_Australia@yahoo.com
Subject: Micro switch

Hi all,
Got my idle/ full power enrichment micro switch from Yurik and fitted it. Started the engine and the rest was utter disbelief.... It started without moving the metal to the floor and straightway idled at 900 rpm .for years now it was hard to start and when it did, it idled at say 2000rpm than falling back to 1200. I never got it any better. This is all past now.
Thanks to Les and All providing this platform which does make an interaction possible. And getting a spare part within 3 days.... just unbelievable.
But it also shows that one gets used to a condition even a faulty one if confronted by it on a daily basis.
No more rough running , just humming..
Very happy
Hartmut


Sent from my iPad

Great news on the Tristar front. And of course we will get pics up on the site as soon as you are back. Will be interesting to see what our kiwi cousins are up to over there on the VW front.
Peter from Port
PS. have a good rest as I will be removing my Syncro's gearbox when you get back. Will need supervision and advice no doubt. Ron Schmidt ready to go as soon as we get it up to him. Bank account primed and ready as well!!!!

Sent from my iPad

On 17 Oct 2014, at 8:00 am, "Hartmut Kiehn hartis@live.com.au [Syncro_T3_Australia]" <Syncro_T3_Australia@yahoogroups.com> wrote:

 

Tnx Skot, the TriStar is a changed vehicle, amazes me . Tomorrow it's off to NZ to see Dave Finnie the next weekend, a long one in NZ and they always enjoying a v dub weekend on their block. Should be interesting to see the vehicles. Will upload pics if Peter of Port shows me how ...!!! m sure he will..

Sent from my iPad

On 16 Oct 2014, at 3:43 pm, "spbconsulting@bigpond.com [Syncro_T3_Australia]" <Syncro_T3_Australia@yahoogroups.com> wrote:

 

Brilliant work Hart & Yurik for supplying the micro-switch.

Cheers,

Skot


On 16/10/2014 3:40 PM, Hartmut Kiehn hartis@live.com.au [Syncro_T3_Australia] wrote:
 


Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 3:38:02 PM AEDT
To: Hartmut Kiehn <hartis@live.com.au>
Subject: Fwd: Micro switch



Sent from my WalkingStick!

Begin forwarded message:

From: Hartmut Kiehn <hartis@live.com.au>
Date: 16 October 2014 2:20:29 PM AEDT
To: Syncro_T3_Australia@yahoo.com
Subject: Micro switch

Hi all,
Got my idle/ full power enrichment micro switch from Yurik and fitted it. Started the engine and the rest was utter disbelief.... It started without moving the metal to the floor and straightway idled at 900 rpm .for years now it was hard to start and when it did, it idled at say 2000rpm than falling back to 1200. I never got it any better. This is all past now.
Thanks to Les and All providing this platform which does make an interaction possible. And getting a spare part within 3 days.... just unbelievable.
But it also shows that one gets used to a condition even a faulty one if confronted by it on a daily basis.
No more rough running , just humming..
Very happy
Hartmut


Sent from my iPad