Another syncro panel van has emerged which is destined for the evil bay scrap heap. Its a Telstra Syncro with the usual finishes and is on the aussieveedubbers forum and listed for sale in Brisvegas.
Sink link for pics and info:
http://forums.aussieveedubbers.com/viewtopic.php?tid=91004
Cheers,
Skot
Terrigal NSW
-------- Original Message --------
Subject: | Re: [Syncro_T3_Australia] Re: Syncro wrecking on ebay |
---|---|
Date: | Wed, 08 Jun 2011 10:32:35 +1000 |
From: | Scott Pitcher <spbconsulting@bigpond.com> |
To: | Syncro_T3_Australia@yahoogroups.com |
Ben,
When I get all the bits I need I will be harassing you regularly to get all the details of how to put this together. Michael from Townsville seems to have the engine cradle I need - problem is getting it down to Terrigal NSW.
With the crashed car and Excess payment and new car purchase - a lot of my new donk funds are gone.
I will see what happens in the next tax period and hopefully get some more bits then.
Cheers,
Skot
On 7/06/2011 8:35 AM, bencroft96 wrote:Skot,remember also the VW engine sits 10 mm lower than the ej25.This is somthing that I overlooked and are correcting now.You have to space the moustach bar out 10mm from the body.
I have only just found this info since I have been chasing a vibration at 110-115 ks.
I have made a laser alligning tool to help allign the two flanges.
You will also have to modify the bash bar again.
Better pull the finger out if your going to do this by Christmas!!Maybe better to wait till next year.
By the way excellent purchase with your new car.
Did you know there is now a 12 month wait on Polo GTI if you want one.Thats ridiculous.
BenC
--- In Syncro_T3_Australia@yahoogroups.com, Scott Pitcher <spbconsulting@...> wrote:
>
> Graham,
>
> I suppose today would have been a heat wave compared with a couple of
> weeks ago @ 3:30am.
>
> My plans are for a 2.5L 4 banger boxer scooby donk as the 3.0L and the
> 3.3L are just too powerful and in my opinion they would break gearboxes
> too quickly especially with my hoon wife driving.
>
> Yes , the syncro cradle sits lower and I will also need the longitudinal
> cradle section from the gearbox back as mine has two scooby 2.7L engine
> mounts that wont fit the later scooby - especially with an RJES
> bell-housing.
>
> Cheers,
>
> Skot
>
> On 6/06/2011 8:47 PM, Graham Adams wrote:
> >
> >
> > Hi Scot
> > Good to see you on the roadtoday .You caught me in my other toy , a
> > two year bare metal,part new chassis rebuild ten years ago and the
> > reason why I wasn't at the VW nats.
> > Just back from our yearly 'Brass Monkey Run 'started *3.30 am* Sun
> > at Kariong to Mudgee for breakfast at 8.30 am via Eastern Creek and
> > Bathhurst joined by 50 other classic sports cars.The only rule being
> > hoods down the entire trip.
> > Syncronauts ain't the only crazy bastards out there.
> > Isn't the Syncro engine cradle the same as a 2wd engine cradle? I
> > suppose not as one engine sits higher. Sounds like you have plans to
> > replace your 2.7 Subie with a 3.0 or maybe a 3.6. I'm interested.
> >
> > Cheers Graham
> >
> >
> > ----- Original Message -----
> > *From:* Scott Pitcher <mailto:spbconsulting@...>
> > *To:* Syncro_T3_Australia@yahoogroups.com
> > <mailto:Syncro_T3_Australia@yahoogroups.com>
> > *Sent:* Monday, June 06, 2011 5:39 PM
> > *Subject:* Re: [Syncro_T3_Australia] Re: Syncro wrecking on ebay
> >
> >
> >
> >
> >
> > Graham,
> >
> > Saw you and your boss on the freeway and through East Gosford
> > today up to Erina driving your sports car.
> >
> > Looks like a fun car to drive (in summer when its a bit warmer).
> > Your Mrs looked a tad cold.
> >
> > Thanks for the heads up about the wrecker syncro. It would only be
> > the engine cradle I would want anyway but that seems to be gone.
> >
> > Oh well just keep looking for something nearby.
> >
> > Cheers,
> >
> > Skot
> >
> >
> >
> >
> > On 6/06/2011 5:24 PM, Ben wrote:
> >
> >>
> >>
> >> Graham,is it a panel van with no windows?
> >> BenC
> >>
> >> --- In Syncro_T3_Australia@yahoogroups.com
> >> <mailto:Syncro_T3_Australia%40yahoogroups.com>, "Graham Adams"
> >> <g.adams2@> wrote:
> >> >
> >> > Hi Bill
> >> >
> >> > I had a look at that Central Coast Syncro only last week.The
> >> seller runs a VW workshop and owns a Syncro himself
> >> > The Syncro body is in pretty good nick and .full of spare
> >> engines ( typicaly for a w/shop). The engine and engine mounting
> >> bar has gone . It has Telstra type rear bumper bar which he said
> >> he would sell to me for $200 but I figured was to heavy. He
> >> knocked back $500 for the gearbox which on second thoughts would
> >> not have had a diff lock if it was a Telstra van ( but no grab
> >> handles at rear ! ). He,s after $2000 the lot.
> >> >
> >> > Cheers Graham
> >> >
> >> >
> >> > ----- Original Message -----
> >> > From: plander@
> >> > To: Syncro_T3_Australia@yahoogroups.com
> >> <mailto:Syncro_T3_Australia%40yahoogroups.com>
> >> > Sent: Sunday, June 05, 2011 11:32 AM
> >> > Subject: Re: [Syncro_T3_Australia] Syncro wrecking on ebay
> >> >
> >> >
> >> >
> >> > Link
> >> >
> >> >
> >> http://www.ebay.com.au/itm/VW-SYNCRO-KOMBI-WRECKING-/320708910542?pt=AU_Cars&hash=item4aabbd9dce
> >> <http://www.ebay.com.au/itm/VW-SYNCRO-KOMBI-WRECKING-/320708910542?pt=AU_Cars&hash=item4aabbd9dce>
> >> >
> >> > > Bill <marg_bill@> wrote:
> >> > >
> >> > > There is a syncro on ebay for wrecking. The motor is missing
> >> but all 4wd
> >> > > bits in tact. It's on the nsw central coast not far from a
> >> couple of
> >> > > members. Maybe they could check it out if anyone is
> >> interested. Bill.
> >> >
> >>
> >
> >
>