Replacing Coolant

1
Hello to all fellow owners from a sunny Port Macquarie (for the moment).

Hart has got some lovely new G12 coolant and I think it would be a good idea to do a cooling system flush before putting in the new coolant. I have done this on old holdens etc. many times but are there any tips or tricks for flushing a Syncro.

Would greatly appreciate advice.

Cheers, Peter
2
Make sure that it is G12+ or G12++. not just G12.
Use only distilled or demineralised water. (Cheapest at Franklins or IGA)
Mix as per instructions on bottle and in the workshop manual.

Phill



> anni43elli <peter@coeconsult.com.au> wrote:
>
> Hello to all fellow owners from a sunny Port Macquarie (for the moment).
>
> Hart has got some lovely new G12 coolant and I think it would be a good
> idea to do a cooling system flush before putting in the new coolant. I
> have done this on old holdens etc. many times but are there any tips or
> tricks for flushing a Syncro.
>
> Would greatly appreciate advice.
>
> Cheers, Peter
3

Phill/Peter,

 

It’s  G12++ what I bought.

 

Hart

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of plander@optusnet.com.au
Sent: Friday, 24 September 2010 6:59 AM
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: [Syncro_T3_Australia] Replacing Coolant

 

 

Make sure that it is G12+ or G12++. not just G12.
Use only distilled or demineralised water. (Cheapest at Franklins or IGA)
Mix as per instructions on bottle and in the workshop manual.

Phill

> anni43elli <peter@coeconsult.com.au>
wrote:
>
> Hello to all fellow owners from a sunny Port Macquarie (for the moment).
>
> Hart has got some lovely new G12 coolant and I think it would be a good
> idea to do a cooling system flush before putting in the new coolant. I
> have done this on old holdens etc. many times but are there any tips or
> tricks for flushing a Syncro.
>
> Would greatly appreciate advice.
>
> Cheers, Peter