Spare Wheel Carriers

1
I bought a "universal" wheel carrier from Opposite Lock 4wd accessories
and made it fit. This was about 10 years ago and the cost then was
around $400.It required accurate positioning so that the tail lights &
number plate were visible and so that the tailgate could clear the
tyre when opened.I am currently running 235 70 16 tyres & the tail
gate clears it by 5mm.I'm not sure if this product is still
available , but I'm confident that with slight mods many of the local
products would fit the t3 syncro.Hope this helps,cheers, Eddie
Bergodaz.
2

Hi all…I have a NEW Spare Wheel Carrier to suit the t3 syncro I imported from Bernd Jaeger…Brand New…never been installed…I wish to sell…$500.

Location Perth West Australia .

Ken 0419 882 777   txt me and I can ph you back….or email…   kct@iinet.net.au

I also have some other parts…High compression Pistons and barrels (New) German K&S..$500

Regards Ken.

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of bergodaz
Sent: Monday, 14 May 2007 6:30 PM
To: Syncro_T3_Australia@yahoogroups.com
Subject: [Syncro_T3_Australia] Spare Wheel Carriers

 

I bought a "universal" wheel carrier from Opposite Lock 4wd accessories
and made it fit. This was about 10 years ago and the cost then was
around $400.It required accurate positioning so that the tail lights &
number plate were visible and so that the tailgate could clear the
tyre when opened.I am currently running 235 70 16 tyres & the tail
gate clears it by 5mm.I ' m not sure if this product is still
available , but I ' m confident that with slight mods many of the local
products would fit the t3 syncro.Hope this helps,cheers, Eddie
Bergodaz.

3
Good day volks,
In case Ken's carrier doesn't appeal and just to complete the record and offer yet another suggestion, I have added a photo of my campervan to the "rear spare wheel carrier" album.It illustrates both  bullbar and roof rack front mounted spares. I was on my way home from Perth having bought the camper there complete with 6 x 14" and 6 x 16" wheels to bring home to Melbourne. (2 on back,1 on bullbar, 1 on roof rack, 1 in front under floor carrier and 3 inside sleeping with me when I retyred for the night.)
Moral of the story is if you are carrying 8 spare wheels I'll guarantee you won't get 1 puncture.
Cheers
Roger
 
Ken Tyler <kct@iinet.net.au> wrote:
Hi all…I have a NEW Spare Wheel Carrier to suit the t3 syncro I imported from Bernd Jaeger…Brand New…never been installed…I wish to sell…$500.
Location Perth West Australia .
Ken 0419 882 777   txt me and I can ph you back….or email…   kct@iinet.net. au
I also have some other parts…High compression Pistons and barrels (New) German K&S..$500
Regards Ken.
From: Syncro_T3_Australia @yahoogroups. com [mailto:Syncro_ T3_Australia@ yahoogroups. com] On Behalf Of bergodaz
Sent: Monday, 14 May 2007 6:30 PM
To: Syncro_T3_Australia @yahoogroups. com
Subject: [Syncro_T3_Australi a] Spare Wheel Carriers
I bought a "universal" wheel carrier from Opposite Lock 4wd accessories
and made it fit. This was about 10 years ago and the cost then was
around $400.It required accurate positioning so that the tail lights &
number plate were visible and so that the tailgate could clear the
tyre when opened.I am currently running 235 70 16 tyres & the tail
gate clears it by 5mm.I ' m not sure if this product is still
available , but I ' m confident that with slight mods many of the local
products would fit the t3 syncro.Hope this helps,cheers, Eddie
Bergodaz.

How would you spend $50,000 to create a more sustainable environment in Australia? Go to Yahoo!7 Answers and share your idea.