> greg_navarro95 <greg_navarro95@yahoo.com> wrote:
>
> Hi I am having trouble finding repalcement wheel nuts for my Trakka 15
> inch alloy rims and wondering if anyone else has 5 spare or knows where
> to find them.
>
> They are the same alloy rims as shown in the Trakka brochure in the
> photos section, any leads appreciated. Regards Greg
Hi I am having trouble finding repalcement wheel nuts for my Trakka 15 inch alloy rims and wondering if anyone else has 5 spare or knows where to find them.
They are the same alloy rims as shown in the Trakka brochure in the photos section, any leads appreciated. Regards Greg
> Gary Cookson <gary@twentytwentyone.net> wrote:
>
> Greg, what shape are they? if tapered rather than the ball seat you can
> buy something similar from Just Kampers in the UK. Postage is
> reasonable.
>
> http://www.justkampers.com/shop/type_2_bay/type-2-bay-vehicle-accessories
> /wheels/alloy-wheels/m14-wheel-nut-j14040.html
>
> Gary Cookson
>
> > Hi I am having trouble finding repalcement wheel nuts for my Trakka 15
> inch alloy rims and wondering if anyone else has 5 spare or knows where
> to find them.
> >
> > They are the same alloy rims as shown in the Trakka brochure in the
> photos section, any leads appreciated. Regards Greg
> >
> >
--- In Syncro_T3_Australia@yahoogroups.com, "greg_navarro95" <greg_navarro95@...> wrote:
>
> Hi I am having trouble finding repalcement wheel nuts for my Trakka 15 inch alloy rims and wondering if anyone else has 5 spare or knows where to find them.
>
> They are the same alloy rims as shown in the Trakka brochure in the photos section, any leads appreciated. Regards Greg
>
Hi Greg,
Checked out Canterbury Wheels this morning and they have the Nuts and Washers at $3.50 each.They have enough instock.
Cheers,
Everard
--- On Sun, 2/5/10, bergodaz <bergodaz@ozemail.com.au> wrote:
|
That's right Washers.If we are talking the same language then the nuts that fit on the Wheels that were put on by trakka (ie 15inch) do need washers so that the nut does not over tighten on the stud and get sheared off.I am talking through experience.So heed the advice if you are referring to the same wheels.
Cheers,
Everard
--- On Wed, 5/5/10, plander@optusnet.com.au <plander@optusnet.com.au> wrote:
|
> Everard Hoffman <everardhoffman@yahoo.com> wrote:That's right Washers.If we are talking the same language then���� the nuts that fit on the
>
--- On Wed, 5/5/10, plander@optusnet.com.au <plander@optusnet.com.au> wrote:
From: plander@optusnet.com.au <plander@optusnet.com.au>
Subject: Re: Re: [Syncro_T3_Australia] Re: wheel nuts
To: Syncro_T3_Australia@yahoogroups.com
Received: Wednesday, 5 May, 2010, 8:22 AM
����
Canterbury Wheels this morning and they have the Nuts and Washers
Washers????? ?????
No i do not have any just yet.The wheels are the CSA brand wheels which were fitted by Trakka on their VW Campers and on the Carat as well.They are 6x15 inch wheels.The PCD is the same as the 14 inch wheels.The wheels are a snug fit on the hubs and the wheel nuts fit right into the little slot left on the wheel bolt holes.This is where the "Washers" come into play.They prevent one from over tightening the nuts.If one were to use the Nuts without the washers then one can overtighten the nuts and what i experienced once was to overtighten the nut to find the nut come off in the wheel brace.
I'm sure you are aware of the CSA wheels so take a look at a Syncro which has them on and you will get an idea of what i am referring to.
Cheers,
Everard
--- On Thu, 6/5/10, plander@optusnet.com.au <plander@optusnet.com.au> wrote:
|
> Everard Hoffman <everardhoffman@yahoo.com> wrote:
>
> No i do not have any just yet.The wheels are the CSA brand wheels which
> were fitted by Trakka on their VW Campers and on the Carat as well.They
> are 6x15 inch wheels.The PCD is the same as the 14 inch wheels.The
> wheels are a snug fit on the hubs and the wheel nuts fit right into the
> little slot left on the wheel bolt holes.This is where the "Washers"
> come into play.They prevent one from over tightening the nuts.If one
> were to use the Nuts without the washers then one can overtighten the
> nuts and what i experienced once was to overtighten the nut to find the
> nut come off in the wheel brace.
> I'm sure you are aware of the CSA wheels so take a look at a Syncro
> which has them on and you will get an idea of what i am referring to.
> Cheers,
> Everard����
>
> --- On Thu, 6/5/10, plander@optusnet.com.au <plander@optusnet.com.au>
> wrote:
>
>
> From: plander@optusnet.com.au <plander@optusnet.com.au>
> Subject: Re: Re: Re: [Syncro_T3_Australia] Re: wheel nuts
> To: Syncro_T3_Australia@yahoogroups.com
> Received: Thursday, 6 May, 2010, 2:13 AM
>
>
> Any pictures of the wheels?
>
>
>
> > Everard Hoffman <everardhoffman@yahoo.com> wrote:
> >
> That's right Washers.If we are talking the same language then��������������������
> the nuts that fit on the
> Wheels that were put on by trakka (ie 15inch) do need washers so that
> the nut does not over
> tighten on the stud and get sheared off.I am talking through
> experience.So heed the advice
> if you are referring to the same wheels.
> Cheers,
> Everard
>
> --- On Wed, 5/5/10, plander@optusnet.com.au <plander@optusnet.com.au>
> wrote:
>
>
> From: plander@optusnet.com.au <plander@optusnet.com.au>
> Subject: Re: Re: [Syncro_T3_Australia] Re: wheel nuts
> To: Syncro_T3_Australia@yahoogroups.com
> Received: Wednesday, 5 May, 2010, 8:22 AM
>
>
> ��������������������
>
>
>
> Canterbury Wheels this morning and they have the Nuts and Washers
>
> Washers????? ?????
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>
>