NSW Rip Off

41
Bugger!
 
----- Original Message -----
Sent: Tuesday, May 11, 2010 9:44 PM
Subject: Re: Re: [Syncro_T3_Australia] NSW Rip Off

 



> The previous Owner may also have an engineers certificate as most
> conversions come with this.
>

Not in 1989. Just a sticker.

42

Hi Phill,

 

Today I picked up a diff lock control element, which VW calls Element, Throttle Control T2 , I paid $ 90 (trade)

Anybody who wants one, I could get it and bring it down to the Nats with me. There are 11 available.

 

Also I  tried to get a few of those slotted pins but must have had the wrong #s could you kindly give it to me again?

 

Much appreciated, and see you (very) soon,  Hart

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of plander@optusnet.com.au
Sent: Tuesday, 11 May 2010 6:26 AM
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

 

 

Did you hear about the driver waiting at a red light when a fire engine with siren and lights came up behind him. He then checked that it was clear and went through the red light to allow the fire engine to proceed as required by law. Unfortunately it had a camera and he was booked. He took it to court and the judge said that he did the right thing. The RTA said that he went through a red light and took points from his licence, which he then lost. The court has no authority over the RTA.

> Hartmut Kiehn <hartis@live.com.au>
wrote:
>
> Not only RTA , Phill, the same stands for CASA and also DoCS who are
> prosecutors and judges, all in one. Hart
>
>
>
> From: Syncro_T3_Australia@yahoogroups.com
> [mailto:Syncro_T3_Australia@yahoogroups.com]
On Behalf Of
> plander@optusnet.com.au
> Sent: Monday, 10 May 2010 8:35 PM
> To: Syncro_T3_Australia@yahoogroups.com
> Subject: Re: RE: RE: [Syncro_T3_Australia] NSW Rip Off
>
>
>
>
>
>
> speak with
> > people who understand the relevant pieces of legislation.
> >
>
> Nobody understands NSW legislation. Ask two people and you'll get two
> answers.
>
> From a state where a court will let you off but the RTA finds you guilty
> and
> you cannot appeal.

43
Hartmut,

On ETKA Illustration 71-00 the part that I think that you are referring to is 27.

This is part number N 013 294 2 Spring sleeve 3 x 10

There is also another part number listed which is not illustrated N 013 325 1 Spring sleeve 3 x 14

Do those measurements sound correct?

You will see on your ETKA page what I am talking about.

Phill



> Hartmut Kiehn <hartis@live.com.au> wrote:
>
> Hi Phill,
>
>
>
> Today I picked up a diff lock control element, which VW calls Element,
> Throttle Control T2 , I paid $ 90 (trade)
>
> Anybody who wants one, I could get it and bring it down to the Nats with
> me.
> There are 11 available.
>
>
>
> Also I tried to get a few of those slotted pins but must have had the
> wrong
> #s could you kindly give it to me again?
>
>
>
> Much appreciated, and see you (very) soon, Hart
>
>
>
> From: Syncro_T3_Australia@yahoogroups.com
> [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of
> plander@optusnet.com.au
> Sent: Tuesday, 11 May 2010 6:26 AM
> To: Syncro_T3_Australia@yahoogroups.com
> Subject: Re: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off
>
>
>
>
>
> Did you hear about the driver waiting at a red light when a fire engine
> with
> siren and lights came up behind him. He then checked that it was clear
> and
> went through the red light to allow the fire engine to proceed as
> required
> by law. Unfortunately it had a camera and he was booked. He took it to
> court
> and the judge said that he did the right thing. The RTA said that he
> went
> through a red light and took points from his licence, which he then
> lost.
> The court has no authority over the RTA.
>
> > Hartmut Kiehn <hartis@live.com.au <mailto:hartis%40live.com.au> >
> wrote:
> >
> > Not only RTA , Phill, the same stands for CASA and also DoCS who are
> > prosecutors and judges, all in one. Hart
> >
> >
> >
> > From: Syncro_T3_Australia@yahoogroups.com
> <mailto:Syncro_T3_Australia%40yahoogroups.com>
> > [mailto:Syncro_T3_Australia@yahoogroups.com
> <mailto:Syncro_T3_Australia%40yahoogroups.com> ] On Behalf Of
> > plander@optusnet.com.au <mailto:plander%40optusnet.com.au>
> > Sent: Monday, 10 May 2010 8:35 PM
> > To: Syncro_T3_Australia@yahoogroups.com
> <mailto:Syncro_T3_Australia%40yahoogroups.com>
> > Subject: Re: RE: RE: [Syncro_T3_Australia] NSW Rip Off
> >
> >
> >
> >
> >
> >
> > speak with
> > > people who understand the relevant pieces of legislation.
> > >
> >
> > Nobody understands NSW legislation. Ask two people and you'll get two
> > answers.
> >
> > From a state where a court will let you off but the RTA finds you
> guilty
> > and
> > you cannot appeal.
44

Will check tomorrow, have no access to ETKA here  but 0132942 came not up on his screen. Maybe best to look it up on his screen. Thanks for this , Phill, let you know of the outcome, the parts guy here is more than helpful.  Hartmut

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of plander@optusnet.com.au
Sent: Wednesday, 12 May 2010 7:59 PM
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: RE: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

 

 

Hartmut,

On ETKA Illustration 71-00 the part that I think that you are referring to is 27.

This is part number N 013 294 2 Spring sleeve 3 x 10

There is also another part number listed which is not illustrated N 013 325 1 Spring sleeve 3 x 14

Do those measurements sound correct?

You will see on your ETKA page what I am talking about.

Phill

> Hartmut Kiehn <hartis@live.com.au>
wrote:
>
> Hi Phill,
>
>
>
> Today I picked up a diff lock control element, which VW calls Element,
> Throttle Control T2 , I paid $ 90 (trade)
>
> Anybody who wants one, I could get it and bring it down to the Nats with
> me.
> There are 11 available.
>
>
>
> Also I tried to get a few of those slotted pins but must have had the
> wrong
> #s could you kindly give it to me again?
>
>
>
> Much appreciated, and see you (very) soon, Hart
>
>
>
> From: Syncro_T3_Australia@yahoogroups.com
> [mailto:Syncro_T3_Australia@yahoogroups.com]
On Behalf Of
> plander@optusnet.com.au
> Sent: Tuesday, 11 May 2010 6:26 AM
> To: Syncro_T3_Australia@yahoogroups.com
> Subject: Re: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off
>
>
>
>
>
> Did you hear about the driver waiting at a red light when a fire engine
> with
> siren and lights came up behind him. He then checked that it was clear
> and
> went through the red light to allow the fire engine to proceed as
> required
> by law. Unfortunately it had a camera and he was booked. He took it to
> court
> and the judge said that he did the right thing. The RTA said that he
> went
> through a red light and took points from his licence, which he then
> lost.
> The court has no authority over the RTA.
>
> > Hartmut Kiehn <hartis@live.com.au
<mailto:hartis%40live.com.au> >
> wrote:
> >
> > Not only RTA , Phill, the same stands for CASA and also DoCS who are
> > prosecutors and judges, all in one. Hart
> >
> >
> >
> > From: Syncro_T3_Australia@yahoogroups.com
> <mailto:Syncro_T3_Australia%40yahoogroups.com>
> > [mailto:Syncro_T3_Australia@yahoogroups.com
> <mailto:Syncro_T3_Australia%40yahoogroups.com> ] On Behalf Of
> > plander@optusnet.com.au
<mailto:plander%40optusnet.com.au>
> > Sent: Monday, 10 May 2010 8:35 PM
> > To: Syncro_T3_Australia@yahoogroups.com
> <mailto:Syncro_T3_Australia%40yahoogroups.com>
> > Subject: Re: RE: RE: [Syncro_T3_Australia] NSW Rip Off
> >
> >
> >
> >
> >
> >
> > speak with
> > > people who understand the relevant pieces of legislation.
> > >
> >
> > Nobody understands NSW legislation. Ask two people and you'll get two
> > answers.
> >
> > From a state where a court will let you off but the RTA finds you
> guilty
> > and
> > you cannot appeal.

45
Hart,
 
Are you referring to the blue coloured diff lock vacuum actuator that goes on the rear diff? If so - I'm in for one mines as crooked as a dogs....
 
Thanks,
 
Scott
 
----- Original Message -----
Sent: Wednesday, May 12, 2010 7:44 PM
Subject: RE: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

 

Hi Phill,

Today I picked up a diff lock control element, which VW calls Element, Throttle Control T2 , I paid $ 90 (trade)

Anybody who wants one, I could get it and bring it down to the Nats with me. There are 11 available.

Also I  tried to get a few of those slotted pins but must have had the wrong #s could you kindly give it to me again?

Much appreciated, and see you (very) soon,  Hart

From: Syncro_T3_Australia @yahoogroups. com [mailto:Syncro_ T3_Australia@ yahoogroups. com] On Behalf Of plander@optusnet. com.au
Sent: Tuesday, 11 May 2010 6:26 AM
To: Syncro_T3_Australia @yahoogroups. com
Subject: Re: RE: RE: RE: [Syncro_T3_Australi a] NSW Rip Off

 

Did you hear about the driver waiting at a red light when a fire engine with siren and lights came up behind him. He then checked that it was clear and went through the red light to allow the fire engine to proceed as required by law. Unfortunately it had a camera and he was booked. He took it to court and the judge said that he did the right thing. The RTA said that he went through a red light and took points from his licence, which he then lost. The court has no authority over the RTA.

> Hartmut Kiehn <hartis@live. com.au> wrote:
>
> Not only RTA , Phill, the same stands for CASA and also DoCS who are
> prosecutors and judges, all in one. Hart
>
>
>
> From: Syncro_T3_Australia @yahoogroups. com
> [mailto:Syncro_T3_Australia @yahoogroups. com] On Behalf Of
> plander@optusnet. com.au
> Sent: Monday, 10 May 2010 8:35 PM
> To: Syncro_T3_Australia @yahoogroups. com
> Subject: Re: RE: RE: [Syncro_T3_Australi a] NSW Rip Off
>
>
>
>
>
>
> speak with
> > people who understand the relevant pieces of legislation.
> >
>
> Nobody understands NSW legislation. Ask two people and you'll get two
> answers.
>
> From a state where a court will let you off but the RTA finds you guilty
> and
> you cannot appeal.

46

Scott,will order and bring you one    Hart

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Mr Scott Pitcher
Sent: Wednesday, 12 May 2010 8:55 PM
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

 

 

Hart,

 

Are you referring to the blue coloured diff lock vacuum actuator that goes on the rear diff? If so - I'm in for one mines as crooked as a dogs....

 

Thanks,

 

Scott

 

----- Original Message -----

Sent: Wednesday, May 12, 2010 7:44 PM

Subject: RE: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

 

 

Hi Phill,

Today I picked up a diff lock control element, which VW calls Element, Throttle Control T2 , I paid $ 90 (trade)

Anybody who wants one, I could get it and bring it down to the Nats with me. There are 11 available.

Also I  tried to get a few of those slotted pins but must have had the wrong #s could you kindly give it to me again?

Much appreciated, and see you (very) soon,  Hart

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of plander@optusnet.com.au
Sent: Tuesday, 11 May 2010 6:26 AM
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

 

Did you hear about the driver waiting at a red light when a fire engine with siren and lights came up behind him. He then checked that it was clear and went through the red light to allow the fire engine to proceed as required by law. Unfortunately it had a camera and he was booked. He took it to court and the judge said that he did the right thing. The RTA said that he went through a red light and took points from his licence, which he then lost. The court has no authority over the RTA.

> Hartmut Kiehn <hartis@live.com.au> wrote:
>
> Not only RTA , Phill, the same stands for CASA and also DoCS who are
> prosecutors and judges, all in one. Hart
>
>
>
> From: Syncro_T3_Australia@yahoogroups.com
> [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of
> plander@optusnet.com.au
> Sent: Monday, 10 May 2010 8:35 PM
> To: Syncro_T3_Australia@yahoogroups.com
> Subject: Re: RE: RE: [Syncro_T3_Australia] NSW Rip Off
>
>
>
>
>
>
> speak with
> > people who understand the relevant pieces of legislation.
> >
>
> Nobody understands NSW legislation. Ask two people and you'll get two
> answers.
>
> From a state where a court will let you off but the RTA finds you guilty
> and
> you cannot appeal.

47

I haven’t been following this but if the part under discussion is the pin used to secure the diff lock vacuum actuator to the lock yoke, it is a standard commercial part and is available from bearing suppliers.  The name used in Australia is “roll pin”.  The 3mm diameter is a standard commercial size.  I have bought them previously, can’t remember which bearing supplier it was.

Les

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of plander@optusnet.com.au
Sent: 12 May 2010 19:59
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: RE: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

Hartmut,

On ETKA Illustration 71-00 the part that I think that you are referring to is 27.


This is part number N 013 294 2 Spring sleeve 3 x 10

There is also another part number listed which is not illustrated N 013 325 1 Spring sleeve 3 x 14

Do those measurements sound correct?

You will see on your ETKA page what I am talking about.

Phill


48

All,

When replying to replies to replies to relies, it makes life easier for everyone to cut off the unnecessary content.  When it involves someone’s email settings that keeps adding RE: RE: RE: forever, that can also be cut.

Les

 

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of Hartmut Kiehn
Sent: 13 May 2010 06:57
To: Syncro_T3_Australia@yahoogroups.com
Subject: RE: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off

 

Scott,will order and bring you one Hart From: Syncro_T3_Australia @yahoogroups. com [mailto: Syncro_ T3_Australia@ yahoogroups. com ] On Behalf Of Mr Scott Pitcher Sent: Wednesday, 12 May 2010 8:55 PM To: Syncro_T3_Australia @yahoogroups. com Subject: Re: RE: RE: RE: [Syncro_T3_Australi a] NSW Rip Off Hart, Are you referring to the blue coloured diff lock vacuum actuator that goes on the rear diff? If so - I'm in for one mines as crooked as a dogs.... Thanks, Scott ----- Original Message ----- From: Hartmut Kiehn To: Syncro_T3_Australia @yahoogroups. com Sent: Wednesday, May 12, 2010 7:44 PM Subject: RE: RE: RE: RE: [Syncro_T3_Australi a] NSW Rip Off Hi Phill, Today I picked up a diff lock control element, which VW calls Element, Throttle Control T2 , I paid $ 90 (trade) Anybody who wants one, I could get it and bring it down to the Nats with me. There are 11 available. Also I tried to get a few of those slotted pins but must have had the wrong #s could you kindly give it to me again? Much appreciated, and see you (very) soon, Hart From: Syncro_T3_Australia @yahoogroups. com [mailto: Syncro_ T3_Australia@ yahoogroups. com ] On Behalf Of plander@optusnet. com.au Sent: Tuesday, 11 May 2010 6:26 AM To: Syncro_T3_Australia @yahoogroups. com Subject: Re: RE: RE: RE: [Syncro_T3_Australi a] NSW Rip Off Did you hear about the driver waiting at a red light when a fire engine with siren and lights came up behind him. He then checked that it was clear and went through the red light to allow the fire engine to proceed as required by law. Unfortunately it had a camera and he was booked. He took it to court and the judge said that he did the right thing. The RTA said that he went through a red light and took points from his licence, which he then lost. The court has no authority over the RTA. > Hartmut Kiehn > wrote: > > Not only RTA , Phill, the same stands for CASA and also DoCS who are > prosecutors and judges, all in one. Hart > > > > From: Syncro_T3_Australia @yahoogroups. com > [mailto: Syncro_ T3_Australia@ yahoogroups. com ] On Behalf Of > plander@optusnet. com.au > Sent: Monday, 10 May 2010 8:35 PM > To: Syncro_T3_Australia @yahoogroups. com

> Subject: Re: RE: RE: [Syncro_T3_Australi a] NSW Rip Off > > > > > > > speak with > > people who understand the
relevant pieces of legislation. > > > > Nobody understands NSW legislation. Ask two people and you'll get two > answers. > > From a state where a court will let you off but the RTA finds you guilty > and > you cannot appeal.

49

OMIG!!  It looks like Yahoo has introduced another “improvement”. 

Is everyone getting their replies rolled into the previous correspondence?

Les

 

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of Les Harris
Sent: 13 May 2010 09:01
To: Syncro_T3_Australia@yahoogroups.com
Subject: [Syncro_T3_Australia] Roll Pin

 

 

I haven't been following this but if the part under discussion is the pin used to secure the diff lock vacuum actuator to the lock yoke, it is a standard commercial part and is available from bearing suppliers. The name used in Australia is "roll pin". The 3mm diameter is a standard commercial size. I have bought them previously, can't remember which bearing supplier it was. Les _____ From: Syncro_T3_Australia @yahoogroups. com [mailto: Syncro_ T3_Australia@ yahoogroups. com ] On Behalf Of plander@optusnet. com.au Sent: 12 May 2010 19:59 To: Syncro_T3_Australia @yahoogroups. com Subject: Re: RE: RE: RE: RE: [Syncro_T3_Australi a] NSW Rip Off Hartmut, On ETKA Illustration 71-00 the part that I think that you are referring to is 27. This is part number N 013 294 2 Spring sleeve 3 x 10 There is also another part number listed which is not illustrated N 013 325 1 Spring sleeve 3 x 14 Do those measurements sound correct? You will see on your ETKA page what I am talking about. Phill

50
Message
Yes
 
 

Ralph 

Life!....., Don't talk to me about Life.

 

-----Original Message-----
From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Les Harris
Sent: Thursday, 13 May 2010 11:17 a.m.
To: Syncro_T3_Australia@yahoogroups.com
Subject: RE: [Syncro_T3_Australia] Roll Pin

 

OMIG!! It looks like Yahoo has introduced another "improvement" . Is everyone getting their replies rolled into the previous correspondence? Les _____ From: Syncro_T3_Australia @yahoogroups. com [mailto:Syncro_ T3_Australia@ yahoogroups. com] On Behalf Of Les Harris Sent: 13 May 2010 09:01 To: Syncro_T3_Australia @yahoogroups. com Subject: [Syncro_T3_Australi a] Roll Pin I haven't been following this but if the part under discussion is the pin used to secure the diff lock vacuum actuator to the lock yoke, it is a standard commercial part and is available from bearing suppliers. The name used in Australia is "roll pin". The 3mm diameter is a standard commercial size. I have bought them previously, can't remember which bearing supplier it was. Les _____ From: Syncro_T3_Australia @yahoogroups. com [mailto:Syncro_ T3_Australia@ yahoogroups. com] On Behalf Of plander@optusnet. com.au Sent: 12 May 2010 19:59 To: Syncro_T3_Australia @yahoogroups. com Subject: Re: RE: RE: RE: RE: [Syncro_T3_Australi a] NSW Rip Off Hartmut, On ETKA Illustration 71-00 the part that I think that you are referring to is 27. This is part number N 013 294 2 Spring sleeve 3 x 10 There is also another part number listed which is not illustrated N 013 325 1 Spring sleeve 3 x 14 Do those measurements sound correct? You will see on your ETKA page what I am talking about. Phill

51

Can someone please confirm that you/all are getting the same message format that I am receiving? 

Below is a screen shot of what I am getting on my screen:-

 

 

 

 

52

Yeah, right, it didn’t come through as an insertion; it came through as an attachment!

 

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of Les Harris
Sent: 13 May 2010 10:13
To: Syncro_T3_Australia@yahoogroups.com
Subject: [Syncro_T3_Australia] New Yahoo Format

 

 

Can someone please confirm that you/all are getting the same message format that I am receiving? Below is a screen shot of what I am getting on my screen:-

53
Les, the one from Ralph looked like that to me also

Previous ones were fine though

Gary


On 13/05/2010, at 10:13 AM, Les Harris wrote:

 

Can someone please confirm that you/all are getting the same message format that I am receiving? 

Below is a screen shot of what I am getting on my screen:-

 

<image002.jpg>

 

 

 



54

Hi Les,

 

Everything I’ve received from the group this morning has been like that (previously normal).

 

BRIAN REED

FAIRFIELD NATURAL THERAPIES

185 Wingrove St

Fairfield, Vic. 3078

03 9481 5673   0407 319 521

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of Les Harris
Sent: Thursday, 13 May 2010 10:17 AM
To: Syncro_T3_Australia@yahoogroups.com
Subject: RE: [Syncro_T3_Australia] New Yahoo Format

 

 

Yeah, right, it didn't come through as an insertion; it came through as an attachment! _____ From: Syncro_T3_Australia @yahoogroups. com [mailto: Syncro_ T3_Australia@ yahoogroups. com ] On Behalf Of Les Harris Sent: 13 May 2010 10:13 To: Syncro_T3_Australia @yahoogroups. com Subject: [Syncro_T3_Australi a] New Yahoo Format Can someone please confirm that you/all are getting the same message format that I am receiving? Below is a screen shot of what I am getting on my screen:-

55

Gary,

Thanks for the response.  This confirms that Yahoo has made yet another running change without notice. 

I will get into the management functions and try to get some more information. 

Previously, replies to replies to replies could go on for pages.  In asking members to cut off the irrelevant text, my concern was largely for readability, followed by the bloat of file size.  It was a strange coincidence that this new format hit our screens at the same time!

Les

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of Gary Cookson
Sent: 13 May 2010 10:21
To: Syncro_T3_Australia@yahoogroups.com
Subject: Re: [Syncro_T3_Australia] New Yahoo Format

 

  Les, the one from Ralph looked like that to me also Previous ones were fine though Gary On 13/05/2010, at 10:13 AM, Les Harris wrote: > > Can someone please confirm that you/all are getting the same message format that I am receiving? > > Below is a screen shot of what I am getting on my screen:- > > > > >

> > > > > > > >
style='color:navy'>

56

Thanks Brian.  The readability aspect appears to me to be even worse with this format!

 

From: Syncro_T3_Australia@yahoogroups.com [mailto: Syncro_T3_Australia@yahoogroups.com ] On Behalf Of Brian Reed
Sent: 13 May 2010 10:29
To: Syncro_T3_Australia@yahoogroups.com
Subject: RE: [Syncro_T3_Australia] New Yahoo Format

 

 

Hi Les, Everything I've received from the group this morning has been like that (previously normal). BRIAN REED FAIRFIELD NATURAL THERAPIES 185 Wingrove St Fairfield, Vic. 3078 03 9481 5673 0407 319 521 _____ From: Syncro_T3_Australia @yahoogroups. com [mailto: Syncro_ T3_Australia@ yahoogroups. com ] On Behalf Of Les Harris Sent: Thursday, 13 May 2010 10:17 AM To: Syncro_T3_Australia @yahoogroups. com Subject: RE: [Syncro_T3_Australi a] New Yahoo Format Yeah, right, it didn't come through as an insertion; it came through as an attachment! _____ From: Syncro_T3_Australia @yahoogroups. com [mailto: Syncro_ T3_Australia@ yahoogroups. com ] On Behalf Of Les Harris Sent: 13 May 2010 10:13 To: Syncro_T3_Australia @yahoogroups. com Subject: [Syncro_T3_Australi a] New Yahoo Format Can someone please confirm that you/all are getting the same message format that I am receiving? Below is a screen shot of what I am getting on my screen:-

57
I replaced the roll pin with a 3mm R pin which is very easily removed and replaced and has the advantage of providing a handle for manual control of the diff lock if the vacuum control lets you down. Mine has been in place for maybe five years. Cheers, Roger [Beetle] Bayley.

58

And  I think it is b/s  ( to a comp novice like me it is wasting *ink*)

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Les Harris
Sent: Thursday, 13 May 2010 9:17 AM
To: Syncro_T3_Australia@yahoogroups.com
Subject: RE: [Syncro_T3_Australia] Roll Pin

 

 

OMIG!! It looks like Yahoo has introduced another "improvement". Is everyone getting their replies rolled into the previous correspondence? Les _____ From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Les Harris Sent: 13 May 2010 09:01 To: Syncro_T3_Australia@yahoogroups.com Subject: [Syncro_T3_Australia] Roll Pin I haven't been following this but if the part under discussion is the pin used to secure the diff lock vacuum actuator to the lock yoke, it is a standard commercial part and is available from bearing suppliers. The name used in Australia is "roll pin". The 3mm diameter is a standard commercial size. I have bought them previously, can't remember which bearing supplier it was. Les _____ From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of plander@optusnet.com.au Sent: 12 May 2010 19:59 To: Syncro_T3_Australia@yahoogroups.com Subject: Re: RE: RE: RE: RE: [Syncro_T3_Australia] NSW Rip Off Hartmut, On ETKA Illustration 71-00 the part that I think that you are referring to is 27. This is part number N 013 294 2 Spring sleeve 3 x 10 There is also another part number listed which is not illustrated N 013 325 1 Spring sleeve 3 x 14 Do those measurements sound correct? You will see on your ETKA page what I am talking about. Phill

59

Hart does....  L

 

From: Syncro_T3_Australia@yahoogroups.com [mailto:Syncro_T3_Australia@yahoogroups.com] On Behalf Of Les Harris
Sent: Thursday, 13 May 2010 10:13 AM
To: Syncro_T3_Australia@yahoogroups.com
Subject: [Syncro_T3_Australia] New Yahoo Format

 

 

Can someone please confirm that you/all are getting the same message format that I am receiving? Below is a screen shot of what I am getting on my screen:-

 

__________ Information from ESET NOD32 Antivirus, version of virus signature database 5110 (20100512) __________

 

The message was checked by ESET NOD32 Antivirus.

 

http://www.eset.com

60

Hartmut,

You have lost me.  What is it that is bull shit – the roll pin or the new format?

Les